Feature
●Ultra Lightweight: Recommended for those looking for a lightweight kickstand. It weighs approximately 5.6 oz (160 g), making it very light. If you are concerned about the weight, please try it. The design of the stand is also sleek and does not become bulky. Features a drop-end swivel mechanism to prevent unnecessary carry when stopping or flipping
●(Does not damage the frame) Since it does not attach to the frame, you can attach the side stand without damaging the frame of your precious bicycle. Easy to install! Just replace the quick-release cap and put it on! Note: Installation is only on the left side of the bike, so you may need to reposition the quick release
●【Unbreakable and Strong】The body is made of high quality aluminum alloy. Sturdy and durable. The screws are made of stainless steel for excellent rust resistance
●Length Adjustment: Length adjustment function. Fits a variety of bicycles from 24" to 27.5" and 700c It is compatible with all rear wheel quick release bikes, such as road bikes, mountain bikes, and cross bikes. Fits quick release type with straight drop end Cannot be mounted on carbon frame Cannot be installed through axles, load ends or horizontal drop ends. Bolt-on type does not fit. How to Install: 1. Adjust the silver end block immoscrew with 0.1 inch (2.5 mm) hex wrench to get as close to the drop out width as possible. 2. Install the stand on the left side of the body to touch the frame. At this time, you can loosen the angle adjustment screw and adjust the angle of the stand. 3. Adjust the length by loosening the length adjustment screw as needed. 4.Make sure all the quick shaft, angle adjustment screws, length adjustment screws, and shaft fixing screws are re-tightened and done
●[Product Specifications] Set Includes: Bicycle cycle stand. Compatible Shaft Screw Diameter: M5 Fits: 24-27.5 inches, suitable for 700c quick release hubs. Material: body aluminum alloy Adjustable length: about 34cm-38cm Rod diameter approximately 13.5mm Weight: about 150g Tools needed: 2.5mm, 3mm, 4mm hex wrench (installation tools not included, please prepare it by yourself)
Description
GeneX Bicycle Kickstand Ultralight Side Stand Wont Scratch Frame Quick Release Fits 24"-700C Mountain Road Bike Cross Bike
|
|
|
|
|---|---|---|
Ultra lightweightRecommended for those looking for a light kickstand! It weighs approximately 5.6 oz (160 g), making it very light. If you are concerned about the weight, please try it.The design of the stand is also sleek and does not become bulky.Features a drop-end swivel mechanism to prevent unnecessary carry when stopping or flipping. |
Will not scratch frameSince it is not attached to the frame, you can attach the side stand without damaging your precious bicycle frame.Easy to install! Just replace the quick-release cap and put it on! Note: Installation is only on the left side of the bike, so you may need to reposition the quick release. |
Unbreakable and strongThe body is made of high quality aluminum alloy.Sturdy and durable.The screws are made of stainless steel for excellent rust resistance. |
|
|
|
|
|---|---|---|
Length adjustmentLength adjustment function.Fits a variety of bicycles from 24" to 27.5" and 700cIt is compatible with all rear wheel quick release bikes, such as road bikes, mountain bikes, and cross bikes.Fits quick release type with straight drop endCannot be mounted on carbon frameCannot be installed through axles, load ends or horizontal drop ends.Bolt-on type does not fit. |
Installation Instruction1. Adjust the silver end block immos screw with 2.5mm hex wrench to make it as close as possible to drop out width.2. Install the stand on the left side of the body to touch the frame.At this time, you can loosen the angle adjustment screw and adjust the angle of the stand.3. Adjust the length by loosening the length adjustment screw as needed.4.Make sure all the quick shaft, angle adjustment screws, length adjustment screws, and shaft fixing screws are re-tightened and done. |
Product SpecificationsSet Includes: Bicycle Cycle StandCompatible Shaft Screw Diameter: M5Fits: 24-27.5 inches, suitable for 700c quick release hubs.Material: body aluminum alloyAdjustable length: about 34cm-38cmRod diameter approximately 13.5mmWeight: about 150gTools needed: 2.5mm, 3mm, 4mm hex wrench (installation tools not included, please prepare it by yourself) |
