Feature

●The forged pegs are made with round steel which is heated to approximately 1100 °C, and then melted down immediately into oval shapes with a force of approximately 1 ton.
●Regular round rod pegs turn in the ground and are inconvenient, but oval pegs are easy to insert even in hard ground containing gravel and stones, dont turn in the ground, and hold tightly.
●In addition, the parts on which the rope pull are designed with thickened materials, so they are tough and durable.
●The greatest level of care is take to insure the parts the rope touches will not cause damage to the rope and cause it to break.
●Coated with a cathodic electrodeposition coating that has excellent anti - rust properties allowing it to resist up to 1,000 hours in salt water.


Description

Product Specifications:
Size of each peg:
Full length 11 inches (280 mm), head ellipse 0.5 x 0.7 inches (13 x 17 mm), nail hole thickness 0.3 - 0.4 inches (9 x 7 mm)
Weight/peg: Approx 6.8 oz (192 g)
Contains:
8 Pegs
Materials:
S45C Steel
Coating: Cathodic electrodeposition coating
- Produced in: Sanjo, Niigata.
Product Details:
Their oval shape means they hold tightly and dont turn in the ground.
Check this out!
]
We heated round steel until it is red hot at around 2012F (1,100 ℃)
Then the material is pressed into a n ellipse by around 1 ton of power to forge the pegs.
Superbly strong pegs created by applying pressure to heated steel.
Regular round rod pegs turn in the ground and are inconvenient.
However, oval pegs are easy to insert even in hard ground containing gravel and stones.
They dont turn in the ground, and hold tightly.
In addition, the parts on which the rope pull are designed with thickened materials.
It is designed to withstand strong forces.
Be careful not to cut the rope on the burr in places where it touches.