Feature(may vary by option.)
●Compatible soldering iron: FX-600
●Applicable soldering iron (station type): FX-8801 (FX-888D, FX-889, FR-701, FR-702)
●Soldering iron tip shape: C-type (cylindrical tanner-cut type/tip Φ0.02 inch (0.5 mm))
●RoHS Compliant
●Lead free solder compatible
[T18-C05+ Soldering Iron Tip 1C Type T18-C1]
[Single Item]
Description
Soldering iron replacement part
[Use]
Replacement Part
Features:
Can be replaced with soldering iron tips FX-888D, FX-8801, FX-8805, FX-600, FX-888.
From the Manufacturer
Use and use of BC/C type
This is a type with a cylindrical or angled cylinder, so you can choose the size of the cut surface that suits your work.Used for drawing solder, spare solder for lead wires, etc.
In addition, the BC/C type is an F type with "solder-plating only the cut surface."The F type is used when you want to limit the amount of solder to send or prevent bridge to adjacent parts.
Not for use when large heat capacity is needed.
The amount of heat stored on the soldering tip: BC type is thicker to the bottom side, so even with the same size, the BC type heat storage capacity will be larger.
The soldering of chip capacitors that are prone to failure with B or D type can also be used to form fillets neatly with BC or C types.
Usage examples
|
|
|
|
|---|---|---|
For soldering small parts (such as 0603)Place the cut surface on the land. The tip of the photo is T13-BCF1, and the N2 specification can be preheated. Some chips are specified to not put the soldering iron tip on the electrode. |
Used for soldering chip partsPlace the cut surface on the land, and slowly pull the solder while sending the solder. Some chips are specified to not put the soldering iron tip on the electrode. |
For use with solderPlace the cut surface on the lead and slowly pull the tip of the soldering iron.(Top: BC type, bottom: C type) Please apply the flux before soldering it.Helps reduce bridge and other troubles. |
Usage examples
|
|
|
|
|---|---|---|
For use with spare solder for lead wires.Place the cut surface on the lead wire and slowly pull the solder while sending the solder. |
For use with point solders.1. Heats the land and through holes at the same time. 2. Send the solder so that the fillet is formed all around the land. |
Used for stripping coils1. Heat the coil and terminal at the same time. 2. Send the solder. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| HAKKO T18C05 Soldering Iron Tip 0.5C Type | HAKKO T18C1 Soldering Iron Tip 1C Type | HAKKO T18C08 Soldering Iron Tip/0.8C Type | HAKKO T18S6 Soldering Iron Tip, S6 Type | HAKKO T18C2 Soldering Iron Tip 2C Type | HAKKO T18-C3 Soldering Iron Tip 3C Type | |
| Customer Reviews |
124
|
233
|
41
|
8
|
659
|
233
|
| Price | ¥736 | ¥745 | ¥851 | ¥700 | ¥486 | ¥516 |
| Item No. | T18C05 | T18C1 | T18C08 | T18S6 | T18C2 | T18-C3 |
| Soldering iron tip shape | C-type (cylindrical tanner-cut type/tip Φ0.02 inch (0.5 mm) | C-type (cylindrical tanner-cut type/tip Φ0.04 inch (1.0 mm) | C-type (cylindrical tanner-cut type/tip Φ0.03 inches (0.8 mm) | C-type (cylindrical tanner-cut type/tip Φ1.3 mm) | 2c shape | C-type (cylindrical tanner-cut type/tip Φ 0.1 inch (3.0 mm) |
|
|
|
|
|
|
|---|---|---|---|---|---|
| HAKKO T18C4 Soldering Iron Tip 4C Type | HAKKO T18C5 Soldering Iron Tip/5C Type | HAKKO T19C3 Soldering Iron Tip, 3C Type | HAKKO T19C4 Soldering Iron Tip 4C Type | HAKKO T19C65 Soldering Iron Tip 6.5C Type | |
| Customer Reviews |
69
|
31
|
58
|
11
|
14
|
| Price | ¥540 | ¥811 | ¥851 | ¥773 | ¥755 |
| Item No. | T18C4 | T18C5 | T19C3 | T19C4 | T19C65 |
| Soldering iron tip shape | C-shaped (cylindrical tanner-cut type/tip Φ 0.16 inches (4.0 mm) | C-type (cylindrical tanner-cut type/tip Φ0.2 inches (5.0 mm) | C-type (cylindrical tanner-cut type/tip Φ 0.1 inch (3.0 mm) | C-shaped (cylindrical tanner-cut type/tip Φ 0.16 inches (4.0 mm) | C-shaped (cylindrical tanner-cut type/tip Φ 0.26 inches (6.5 mm) |