Feature(may vary by option.)
●Compatible models: [Honda Mini Scooter most vehicles] Dio (2 St/4 St) series, Zoomer (including FI cars), Today, etc
●Set of 6
●φ16.0 x 13.0
●Super Roller Set, 0.3 oz (8.0 g)
●Made of engineering plastic, this weight roller has excellent heat resistance, high temperature rigidity and abrasion resistance
●Weight rollers are consumables. We inspect every 3,000 km (3,000 km) and replace it if there is any damage or damage
[5.0g]
[13.0g]
[11.0g]
[12.0g]
[10.0g]
[7.5g]
[8.5g]
[5.5g]
[6.5g]
[7.0g]
[6.0g]
[9.0g]
[8.0g]
[9.5g]
Description
Product Description
The inside of the pulley is rotated with very high rotation G pressure and high heat. Weight rollers must be moved in their high temperature and high pressure environment.
Some wear and tear are the cause of melting due to the increase in friction coefficient due to high heat on long distance rides.
Kitaka weight rollers are made of engineering plastic, so they are reliable weight rollers with excellent heat resistance, high temperature rigidity and abrasion resistance.
Weight rollers are consumables. We inspect every 3,000 km (3,000 km) and replace it if there is any damage or damage to it. The higher the running and tuning levels that put strain on the drive system will wear faster.
Legal Disclaimer
4990852033256
From the Manufacturer
Custom drive system
Kitaka Weight Roller is a reliable weight roller with excellent heat resistance, high temperature rigidity and abrasion resistance.
The weight of the best weight roller varies depending on the tuning level, weight of the driver and preference.
Test different rollers to increase acceleration & maximum speed.
Roles & Characteristics
By changing the weight of the weight roller, you can change the speed timing.
When replacing the intake and exhaust parts or tuning a bore up kit or other drive parts, it is necessary to change the weight of the weight roller and adjust the speed timing.
Precautions
Compatible manufacturer, number of grams, and roller sizes are listed on the side.
The roller is oriented, so the stopper is set back to the direction of the pulley rotation, and the inner layer may be removed if you set it upside down.