Feature

●Wheel Hub Shaft deflection and washers. Hub axle block rigidity up, in the even under pressure. The Quick Release Hub Hub 3 degree axis, tighten and close does you knew in test, the manufacturers.
●The large end of the fork or frame, cause the 間隙 axle hub, so all around and uniform pressure and pinching out. Hub axle and does no harm on the rotating hub for the look of it.
●So, this washer has ridges, fill its 間隙 hub axle tightening uniform pressure on the block. (Patented) suru-akusuruhabu a high rigidity on the same thing.
●Washers are also QPQ coated surface treatment to be told and never rust. "No rust" is not, so regular maintenance is necessary.
●The sagging of the hub axle and hub for the rotation effect, washers, but actually riding them, it will feel like the rigidity of the frame and front fork. Front fork has a pronounced it on it. 半信半疑 and who have tried to buy several pair thats too. Especially soft fork end to tremendous effect.


Description

Wheel Hub Axis Deflection Prevention Washer Tightens all around the hub axis with even pressure for increased rigidity.
Compatible ends: Front 0.2 inch (6 mm) / Back 0.2 inch (6 mm) / Front 0.2 inch (7 mm) / Back 0.2 inch (5
By tightening the hubs quick release, the hub axis may bend nearly 3 degrees.
The biggest cause is that there are gaps in the fork and frame ends, so it cannot be tightened with even pressure throughout the hub axis.
The hub axis sagging, which has a negative impact on the rotation of the hub.