Feature

●Size:180x60x28mm
●Weight: about 680g
●Double-sided whetstone #1000 (medium whetstone) and #6000 (for finishing)
●You can sharpen stainless steel and alloy knives, scissors, knives, etc. Ceramic knives cannot be sharpened
●1. Soak the whetstone in the water for a few minutes, and soak it enough water. 2. Sharpen both sides of the knife with an angle of 10 to 20 degrees to the surface of the whetstone. Typically, the 1000 # is enough, but if necessary, you can sharpen it by sharpening at 6000 #. 3. When you finish grinding, scrape the small particles on the knife blade onto newspapers etc. to remove it. 4. When finished, wash with water and dry
●Instruction manual and other accessories are not included. Only the body and anti-slip rubber. This product is simple packaging with low cost without the packaging
●The whetstone may be partially reduced and distorted after each sharpening, so it is recommended to make it flat with a face-correcting grindstone or similar to a sharp knife
●Please be careful when using. Please handle with care to avoid injury, especially in the edges and corners. Grit size: #1000/#6000


Description

Product Features: Double-sided whetstone #1000 (medium whetstone) and #6000 (for finishing). You can sharpen stainless steel and alloy knives, scissors, knives, etc. Ceramic knives cannot be sharpened. Instruction manual and other accessories are not included. Only the body and anti-slip rubber. This product is simple packaging with low cost without the packaging. How to Use: 1. Soak the whetstone in water for a few minutes and soak it enough water. 2. Sharpen both sides of the knife with an angle of 10 to 20 degrees to the surface of the whetstone. Typically, the 1000 # is enough, but if necessary, you can sharpen it by sharpening at 6000 #. 3. When you finish grinding, scrape the small particles on the knife blade onto newspapers etc. to remove it. 4. When finished, wash it with water and dry.