Feature(may vary by option.)
●Motion Sensor Auto On/Off: This ceramic fan heater is equipped with a motion sensor that detects human movement and automatically turns on and off. In addition to preventing forgetting to turn off the power, you can expect to save energy by reducing the consumption of unnecessary power. Especially recommended for installing in places where high traffic traffic such as toilets and washrooms. The motion sensor has a 3 hour auto-off timer that activates the motion sensor and automatically turns off after 3 hours
●When it doesnt get warm or does not emit hot wind: Press "Mode switch" to set it to warm air mode. Please use in rooms within applicable floor area. Please seal the room as much as possible to increase the heating efficiency. [When it comes to smell] There may be a smell when you use it for the first time, but this is not an abnormal phenomenon. It will disappear with use. Use a vacuum cleaner to remove any debris from the filter grill. When the power supply is not powered: Please check if the power plug is not securely plugged into the outlet, or the unit is tilted, and if the safety device (tilt sensor) is working when it falls. Make sure the power plug is properly inserted into an outlet. Or reposition in a horizontal and stable location. When motion sensor is not detected: The motion sensor has a 3-hour auto-off timer that automatically turns off once and turns off after 3 hours. Or press the "sensor" button to activate motion sensor. Clean the sensor area. Keep away from direct sunlight. Please use the sensor range
●Eco Intelligent Constant Temperature Function: With a constant temperature of 59.1°F (25°C), it can automatically detect the temperature of the room and adjust the air volume, so even those who are concerned about excessive heat. Automatic Adjustment: When the room temperature reaches the target value, it will automatically stop operating and start as needed. This prevents energy loss while maintaining comfort. Energy Saving: Automatically monitors the temperature of the room and provides the heating you need. Maintains a comfortable temperature without excessive energy consumption
●3-Stage Air Blower Mode: When no temperature is set, it will run at 3 levels of air flow. Natural wind, weak wind, and high temperature wind, so you can choose your preferred preference, and you can easily adjust the temperature of the heater according to the room or the weather. Suitable for all seasons!
●(Off Timer) Set the turn off timer to automatically turn off and reduce forgotten before sleeping
●Automatic oscillating function: Equipped with an automatic oscillating function, it can heat a wide range of air through the room. Keeps the wind out in certain places and prevents overheating and dryness. Suitable for living room, kitchen, bedroom, etc
●LED Illumination Lamp: The orange lamp gently illuminates the foot of the heater. Make your room more soothing and even when you sleep
[white]
Description
3 Blower Modes
If you press the M "Mode" button on the main unit while driving, the driving mode will be displayed digitally by switching between "Weak" and "Warm Wind" and "High" > Natural Wind > ECO in order.
Microcomputer control ECO function with a temperature of 39°F to 104°F (15°C to 45°C).
How to use the Eco Mode
Press the M "Mode" button on the main unit while driving, the driving mode is switched between "Weak" and "Warm Wind" "High" > Natural Wind > ECO in order to display "ECO" on the lower left side of the digital display.
Set the temperature
Press + or — while ECO-driving to change the temperature setting in 1°C increments.
You can set it in a range of 39°F to 109°F (15°C to 45°C).
When the temperature is reached, the heater will automatically turn off.In addition, when the temperature is lower than the set temperature, the heater will automatically enter the "in".
Motion Sensor Mode is a driving mode that uses motion sensor to detect heat source (infrared ray) to determine if there are people.
Set motion sensor operation.
Press and hold the "Mode" button on the main unit while driving, or press the "Motion Sensor" button on the remote control to activate the motion sensor mode.
When the motion sensor detects an object within the range, it will automatically start to drive in the set mode.If the motion sensor cannot detect the prescribed time, it will blow the air for 3 minutes and it will be in standby mode (stop).
Cancel motion sensor operation.
Long press the "Mode" button on the main unit or press the "Motion Sensor" button on the remote control will turn off the motion sensor in the display panel.
