JJC RI-9 Camera Rain Cover for Canon EOS DSLR or Nikon D-Series Cameras (D6 / D5 / Df / D4s / D3 / D3s / D3X / D850 / D810A / D810 / D700 / D800E / D50 and other Round Eyes Except the camera that uses the cup) protective cover.

Nikon DK-20 DK-21 DK-23 DK-25 with Canon EG & EF Eyepiece and Replaceable Eyecup

Rain Cover Kit includes 3 eye masks that can be used to replace your eye mask with Canon EOS Series Cameras and Nikon D-Series Cameras.

The rain cover features a transparent window to clearly see the camera screen.

In addition, the rain cover can be easily attached to your camera.

Allows full access to your camera and takes up a little space in your camera bag!

Some applicable models

Nikon

Nikon D750 / D600 / D610Nikon D7200 / D7100 / D7000Nikon D5600 / D5500 / D5300 / D5200 / D5100 / D5000Nikon D3500 / D3400 300 / D3100 / D3000 Nikon D300 / D300s / D90 / D80 / D70s / D70 / D60 / D50 / D40 etc.

Also applicable for other cameras that are compatible with Nikon DK-20, DK-21, DK-23, DK-25 eyecup.

Note: Nikon D6 / D5 / Df / D4s / D3 / D3s / D3X / D850 / D810A / D810 / D700 / D800 / D800E / D500 and other Nikon cameras with circular spiral eyecup are not compatible.

Compatible with Canon ---EG Eyecup

Canon EOS-1D X Mark III / 1D X Mark II / 1D X / 1Ds Mark III / 1D Mark IV / 1D Mark IIICanon EOS 5D Mark IV / 5D Mark III / 5DS / 5DS R / 7D Mark II / 7D

Also compatible with other cameras that are compatible with the Canon EG eyecup.

Compatible with Canon---EF Eyecups

Canon EOS 9000D / 8000D / Kiss X10i / X9i / X10 / X9 / X8i / X7i / X7 / X6i / X5 / X4 / X3 / X2 90D / 80D / 77D / 70D

It also works with other cameras that are compatible with the Canon EF Eyecup.

Some applicable lenses

Canon

Canon EF 28-300mm f/3.5-5.6L Canon EF 70-200mm f/2.8L ISCanon EF 70-200mm f/2.8L IS IICanon EF 100-400mm f/4.5-5.6L Canon EF 300mm f/4L Canon EF 400mm f/5.6L

Nikon

Nikon AF-S Nikkor 300mm f/4D IF-EDNikon AF VR Zoom Nikkor 80-400mm f/4.5-5.6D EDNikon AF Zoom Nikkor 80-200mm f/2.8D EDNikon AF-S NIKKOR 70-200mm f/2.8G ED VR II

(Suitable for lenses up to 95x257mm)

Tamron

Tamron SP 150-600mm f/5-6.3 Di VC USD

Sigma

Sigma 150-600mm F5-6.3 DG OS HSM | CSigma 150-600mm F5-6.3 DG OS HSM | SSigma 150-500mm F5-6.3 DG OS HSM

Please see the diagram in the manual to read the description below.

Choose Eyecups

Package includes 3 different size eye masks.Select the right eyepiece for your camera.

1. If the camera has an eyecup installed, please refer to the camera manual to remove the eyecup.2. Follow the steps below to choose the right eye mask.

1. Attach the eye mask in the package bag to the camera.

2. If the tightness of the eye mask is appropriate, this is the right fit.

3. If the eye mask is not tight, please replace it and try again.

3. Remove the selected eye mask to use the following steps.

How to install the eye mask

Hold the eyecup unlock and rotate the eyecup 90 degrees counterclockwise.Now the eyecup and eyecup covers are separated.Place the raincoat and make sure the front end of the lens case is facing at 12 oclock. Next, put the eyecup cover into the mounting holes on the R1-9 transparent window and line the eyecup covers at 3 and 9 oclock.Turn the raincoat inside out and make sure the front end of the lens cover is still facing at the 12 oclock, and the large raised part of the eyecup cover is facing at the 6 oclock position.Place the selected eyecup in the mounting hole and make sure the unlock device is at 9 oclock. Hold the eyecup cap firmly with one hand and the other hand rotate the eyecup 90 degrees clockwise to hold it firmly.

How to fix the arrain coat to the camera

Attach the eyecup from top to bottom to the cameras eyecup mounting position, then adjust the position of the transparent window.Place the front end of the raincoat over the lens, adjust the lens cover to the size, secure the Velcro around the perimeter of the lens and attach the velcro under the lens.Finally, paste the Velcro on both sides of the clear window.

How to connect the camera strap?

Open the Velcro on both sides of the transparent window and connect to the shoulder strap.If you do not need to expose the shoulder strap, you can use the inner shoulder strap to secure it with Velcro.

Remove eyecup

Press the side of the eyecup and lift the eyecup to remove it from the camera.

Precautions

Dont lose the cloth pouch.Do not confuse the eye mask with the eye mask cover.Do not scratch or create creases on clear raincoat windows.Do not pull hard on the raincoat seam to prevent the rain cover from tearing.After use, remove the raincoat from the camera and lens in time.Please note that if there is a certain amount of rain water accumulation, the gap between the shoulder straps and the gap of the transparent window can enter the inner layer of the raincoat.If your camera or lens gets wet, immediately wipe with a dry towel.Please note that if the raincoat velcro accidentally touches the clothes, it may damage the clothes.

Tips

The automatic detection function of the display is not available.The top of the display may be slightly obstructed by the eyecup.It cannot be used with camera internal flash or external flash.The use of the raincoat will affect the infrared remote.For Canon 1D/1Ds, the white balance sensor is blocked by a raincoat, so it cannot achieve the accurate white balance function.

Care Instructions

After use, dry with a dry towel and place in a shady place to air dry.If there is any stains, you can wipe it with a wet paper towel or a wet towel.Do not wash in the washing machine.Do not expose it to the sun for a long time.

Package Contents

Camera rain cover *1

Eye cup x 3

Specifications

Material: Nylon

Net Weight: 125g

Size: (HxL) 32.3 x 29.9 inches (820 x 760 mm) (Including soft pouch)

Color: Black + transparent.