Installation Instruction
1. When replacing the Z-Latch Body, fill the door screw hole with a toothpick or matching stick, and make sure the [2) Countersunk Screws] works well.
(Please make sure to replace the latch.)
2. Insert the Z latch body into the door with the direction of the latch bolt.4. After removing the curing sheet from the front, place it against the Z latch body and secure it with the countersunk screw.
3. Use the [Mounting Type] to mark the position of the handle mounted wooden screws on both sides of the door.
4. Insert the [5] square core into the [5) handle and temporarily screw on the handle
5. Temporarily hold the handle on the other side with the [7. Handle mounting wood screws]
6. Secure the handle with wood screws on the handle to ensure smooth movement while moving the handles on both sides.
7. Install [8 Strike] according to the latch bolt, if needed, then it is done.