Putty that hardens like metal
[Use]
Molded filling
Features:
·Using the main agent and hardening agent is kneaded and can be painted after hardening.
Value set with 3.5 oz (100 g) (A 1.8 oz (50 g) and B 1.8 oz (50 g)
■Features
Hardens like metal.
Cures for 60 minutes.
Can be punched and drilled
Paintable
Can be sunden.
■ Usage
Repairs chips such as stone statues.
Repair furniture chips
Repair chips on concrete blocks.
■What can be used
Metal, wood, concrete, block, ceramic, hard plastic, etc.
■ Cannot be used
Polyethylene, polypropylene, nylon, soft vinyl, fluorine resin, rubber, etc.
|
|
|
---|---|---|
AccessoriesProtective Glove |
ContentsA agent, B agent |
|
|
|
|
|
---|---|---|---|
IntroductionRemove dirt, rust, oil and other contaminants from the repair surface, and dry thoroughly, apply sandpaper to make the surface rough. Wear the included protective gloves and remove the epoxy putty from the plastic case. |
1. Peel off the release film and cut out as much as needed. |
2. Kneading until the color is gone. |
3. Once mixed, place it in a way that you want to repair and shape it.Rub the surface with a damp cloth or a spatula dampened with water. Work can be completed within 60 minutes. |
When the temperature is low, it is practical strength and the time to drill holes, so it can be used at temperatures above 12°F (5°C).
The remaining putty is attached to the release film and put it in the container.
After using, please make sure that the cap of A and B agent is not wrong.It will harden if you mistake, and it will not fall off.
Depending on your constitution, it may be rashed, so please do not touch skin before hardening.
Wear rubber gloves when using.
Ventilation is good for a while after use and use.
Keep out of reach of children and be careful not to prank them.
Do not use for anything other than its intended purpose.
Please be careful as it does not come off with clothing.
Store in a cool place away from direct sunlight.
Once the contents are used out, discard it as a garbage that cannot be burned.