Feature(may vary by option.)
●EFFEX XSR900 16 EZ Fit Bar EZ-FIT Plus Aluminum Black
●Compatible models: XSR900 16
●EZ-FIT Plus, Color: Black, Aluminum, Switch Hole, Weight: 23.2 oz (640 g)
●Handle outer diameter: 1.1 inches (28.6 cm), 0.8 inches (22.2 cm), Inner diameter: 0.5 inches (14.1 cm), Original ratio: 0.04 inches (1 mm) up/0.3 inches (8
●Width: 28.5 inches (725 mm), Height: 1.8 inches (46 mm), Depth: 4.9 inches (124 mm), Aperture Angle: 20°, Standing Angle: 45°
[sliver EZ-FIT Plus]
[Black EZ-FIT Plus]
Description
Product Description
Bolt-on Handlebar for Vehicle Vehicles: For normal use, the handle width is 1.2 inches (30 mm) shorter and the aperture angle is 2° to create a relaxed position with room for your arms.
No need to replace brake hoses or cables. You will not be able to use factory handlebar ends. Please use EFFEX handlebar weights (inner diameter Φ14). The overall width is 1.2 inches (30 mm) narrow, so depending on the length of the handlebar end you are attaching, there may be some changes to the structure.
Indications
The overall width is 1.2 inches (30 mm) narrow, so structural changes may be required
From the Manufacturer
The easy fit bar will help you solve it.
To prevent the balance of normal,
Just a few
Fits your body
Thats why the Easy Fit Bar was born.
EFFEX Bolt-On Handle Bar
- No cable replacement required
- Pre-Drilled
- Clamps have knurling processing.
Pursues the best position for each car model!
The EFFEX Easy Fit Bar features a parallel grip design based on the normal handle.
While maintaining a good balance of normal, we pursued the best position to respond to riders "a little more".
We also pay attention to the ease of installation of the handle.
EZ-Fit Bar High: For a more comfortable position. Adjusts from the normal handle approximately 0.6 - 1.2 inches (14 - 30 mm) in front and up.Replacement of wires may be required.
EZ-Fit Bar: Normal balance, more comfortable. Adjusts approximately 0.3 inches (7 mm) in front and up from the normal handle.
EZ-Fit Bar Low: A normal balance for more sports. Adjusts approximately 0.3 inches (7 mm) forward and below the normal handle.
EZ-Fit Bar Plus: Perfect riding posture for Japanese physique. Compact in the large position of the normal handle.
You can use the handlebar weight to get rid of the burden of your hand.
It is said to amplify fine vibrations caused by impacts from driving and engine rotation.
The Ephex Handlebar Weights absorb fine vibrations that transmit to the grip are firmly absorbed by a rubber mounted balancer shaft.
The balancer shaft is made of brass (brass) material, which is often used as a vibration dampening material for acoustic equipment.
Therefore, the Ephex handlebar weights have high vibration suppression and
Reduces vibration than conventional weight increments to the cutting edge of the bar and reduces discomfort and fatigue.
Balancer Weight for EFFEX Handle
|
|
|
|
|
|---|---|---|---|
|
Vibration from the engine and road surface transfers to the steering wheel, resulting in discomfort and fatigue. |
The traditional weight-type bar end reduces vibrations by converting small vibrations into large vibrations. The vibration itself is not lost. |
Brass balancer shaft with excellent vibration dampening properties absorbs vibration from the handle. |
Vibration reduction. 2 Bar End Designs for Choice Brass balancer shaft reduces vibration Set for aluminum handle (inner diameter 0.6 inch (14 mm)), and steel handle (inner diameter 0.7 - 0.7 inch (17 - 18 mm)). |
