Feature(may vary by option.)
●The price is per "10cm". Order in minimum 1m and 10cm increments. Please make sure to include a number of 10 or more. If you order 3.9 ft (1 m50 cm): Order quantity: 5.9 ft (15 cm) *We will disable orders under 10. ※If you wish to purchase more than 3 m, please contact us by e-mail. Prices may vary depending on the width of the product. (Please check the product name carefully before purchasing)
●■ Size: Width 49.2 inches (125 cm). ■ Function: Shatterproof, UV Protection, Insect Repellent, Heat Shielding Hard Coat. [Caution] If you install it with joints, we recommend reverse installation
●[Note when ordering] ·Please order 5cm larger than the window glass to be applied. We cannot accept any cut of width sizes. ·As this is a made-to-order product, the cut lines on the edges may not be right or straight. ·It cannot be delivered by split into several items
●[Precautions for installation] Do not use near heat sources at all times above 140°F (60°C). Do not use in areas where condensation is always occurring (such as saunas, hot water pools, etc.) In addition, the glass film cannot prevent condensation. Please check the installation environment in advance in order to make sure that the product can be placed on the outside is particularly affected by the environment. It is not recommended for places where there is strong sand or dust. Please be aware that there may be repeats on products with patterns. UV protection products are effective in preventing sunburn and fading, but they are not effective for other reasons other than UV rays. If reflective light from sunlight or indoor fluorescent lights appear like a rainbow-like pattern on the surface of the film (iridescent phenomenon). Please be aware of this in advance as a product feature of glass
●Depending on your computer settings, the color of the actual product may differ from what you see on your monitor screen. ※This product is ordered from the manufacturer. We cannot accept returns or exchanges due to differences in the customers image or size difference
[Towel 125cm]
Description
How to apply the glass film
1: Cleaning glass
Spray a solution of diluted neutral detergent onto the glass to remove the dirt. Removes sticky stains and grime cleanly
2: Spray on glass surface
After cleaning, spray a generous amount of water solution on the glass surface. You can even use more detergents.
3:Cutting glass film
Cut the film a little larger than the surface. As the seal is easy to stick, please peel off the release film and spray a generous amount of water solution on the seal.
4: Application of glass film
Install the film about 2mm inside the window frame Spray a generous amount of water on the surface of the film and use a squeegee to remove air bubbles from the center to the outside.
5:Cut off excess film
Trim the excess film from the outside of the window frame with a ruler or other similar similar to 0.08 inch (2 mm) inside the frame. When jointing, remove makeup, and place the gap up about 0.04 inch (1 mm) and apply it with a poker.
6:Finish
Spray a generous amount of water solution on the film to finish and squeeze out air bubbles with the squeegee. Finally, wipe off the moisture with a towel and youre done.