|
|
|
---|---|---|
Precision wire diameter controlWith closed loop wire diameter control and dual defective detection technology, the wire diameter tolerance is strictly controlled within ±0.03mm, no uneven defects |
DurabilityNo brittle breakdown due to performance degradation, can be stored for a long time |
Strong BalanceThe weaknesses of the PLA itself are improved, but the advantage of the high strength of the PLA material itself is retained to the maximum extent. |
Nozzle Temperature: 398°F - 488°F (190°C - 220°C), Bed Temperature: 88°F - 140°F (30°C - 60°C), Print Speed: 1.6 - 3.1 inches (40 - 80 mm) / s
1. The height of the layer is too high, reducing the height of each layer of printing. 2. The temperature is too low, and the appropriate temperature is too low. The surrounding temperature is too low. The printer cavity should be properly insulated.
1. Confirm the balance of consumables. 2. You can check the wear of the drive gear or adjust the printing speed. 3. Refer to the nozzle when the extruder is clogged.
1. To ensure that the new wire can be extruded properly; 2. Clean the nozzle, use slightly smaller than the nozzle diameter of the fine needle to clean and replace the new nozzle; 3. Check whether the throat cooling fan is running properly, and the fan will lead to throat items before melting expansion 4. Make sure the throat is aging as a result of clogging.
Generally, it starts from three directions: printer, filament and slice settings.You can check and judge from the following 3 points.
(1) Check the working condition of your printer to ensure no wobble or misalignment.
(2) Make sure the filament contains moisture and the wire diameter is not very uniform.When used with a damp filament, bubbles during printing can cause tiny holes in the surface of the mold.It may also cause problems of threading and losing luster.
(3) If it is not a problem with a printer or filament, it will be adjusted by changing the lamination pitch, material extrusion, printing temperature and printing speed.
PLA K5 | PETG K5 | PLA K5 Mat | PLA K5 Silk | WOOD K5 | ABS K5 | |
---|---|---|---|---|---|---|
Customer Reviews |
4.2 out of 5 stars
70
|
3.9 out of 5 stars
19
|
3.8 out of 5 stars
77
|
— |
— |
3.3 out of 5 stars
17
|
Price | ¥2,699¥2,699 | ¥2,899¥2,899 | ¥2,899¥2,899 | — | — | ¥2,899¥2,899 |
Features | Excellent overall performance | 100% BPA free for food contact | Morandy color, matte surface | High gloss and silky surface | Available in three wood colors | 100% BPA free for food contact |
Nozzle Temperature | 190-220°C | 225-245°C | 210-230°C | 210-230°C | 190-220°C | 240-260°C |
Bed Temperature | 30-60°C | 70-80°C | 30-60°C | 30-60°C | 30-60°C | 70-80°C |
Recommended Print | Wide range of uses, suitable for many fields. Printing educational tools, artwork, architectural models, etc. | Excellent chemical resistance and recommended for printing electronic accessories, toys, cosmetics containers, etc. | You want to print models with matte surfaces, flower pots, decorations, daily goods, etc. | Applications are very suitable for lamps, vases, clothing decoration, craft wedding gifts. | It can be used for a wide range of printing applications, with the advantages of a distinctive wood-like finish, very suitable for home decoration. | Excellent chemical resistance and recommended for printing electronic accessories, toys, cosmetics containers, etc. |