Feature

●CAR JUMP STARTER: Sturdy built-in clamps and cables and peak current of 2000 amps can jump start a remote electronic mainstream circuit up to 20 times (up to 8.0L gasoline 7.0L diesel)
●External Battery Charger: USB up to 5V/3A, 9V/2A, 12V/1.5A (capacity of 18000mAh) for charging cell phones, tablets or other devices
●SECURE PROTECTION: With the highest quality of batteries, circuitry and safety performance, this product protects you and your devices from surge current and short circuit. Recharge in just 4 hours by using the included AC adapter or car adapter
●LED Light: The strong light LED flashlight has 3 modes, in the dark, it can draw the attention of surrounding environment in the dark and help in the outdoors, SOS Morse signal flashing can glow for 120 hours when fully charged, and ready for emergencies
●What You Get: Arteck Multi-Function Car Jump Starter External Battery, Car Adapter Charging Base, Jumper Cable Clamp, User Manual, and our popular 2 year warranty and friendly customer service


Description

Easy to use car jump starter
If your car is encasted, you dont have to call a tow vehicle or wait for help by the road. When used with Arteck jumper cables, your car battery will start in seconds. Start your car up to 20 times with a single charge, and built in heavy duty cables and clamps. (Max. 8.0L gasoline 7.0L diesel)

Portable Battery Charger
Arteck is your go-to travel companion. It can also charge devices such as smartphones, tablets, cameras, GPS units, MP3 players, wireless headphones, handheld game consoles and more.

Portable LED flashlight for outdoor use.
The bright LED flashlight has 3 modes, in the dark, it can catch the attention of surrounding with a strobe light, and the SOS signal flashing will glow for 120 hours when fully charged, ready for emergencies.

How to use vehicle start battery
1. Make sure the battery level is more than 50%.
2. Connect the jumper cable to the barrel socket of your device, connect the jumper cable clamp to the car empty battery.
Note: Always connect the black clamp to the battery negative terminal (-) and connect the red clamp to the positive terminal (+). Do not attach the red clamp and black clamps or connect both clamps to one metal part.
3. Next, turn the crank to start the engine.
Note: If the engine is not soon at the first time, please remove the jumper cable from the car battery and leave it at least 10 seconds interval before reconnecting the cable to the battery.
4. Once the engine starts successfully, remove the jumper cable clamp instantly.
Keep out of reach of children.