Feature

●☄ Measurement range: 0-9999ppm (TDS), 0-9999μs/cm (EC), 0.1-80.0℃/32.0-176.0℉(temperature). You can measure the water quality under different conditions
●☄ High Accuracy. This 3-in-1 tester uses the research of titanium alloy and ATC (Automatic Temperature Compensation). Instantly read the temperature to ensure the water quality tester can read accurately at different temperatures
●☄Auto Power Off: LCD screen and auto shutdown setting, the meter will automatically shut down after 5 minutes of non-use to save battery power. TDS machine has automatic temperature correction for measuring modes
●♘ 4 Mode Shift Press the SHIFT button to shift between 4 display modes: ppm & ℃, ppm & ℉, μs/cm & ℃, μs/cm & ℉. This is a must-have tool for home inspecting tap water, filtered water, bottled water, drinking water, etc
●♘ EASY TO USE: Get test results in seconds. Just the on/off button of the publication is a test liquid and dip the electrode (should be under the dip line) and the stable reading press grasp button is to save measurement. 5 minute auto shutdown Save power and extend battery life


Description

TDS Water Meter is a professional water level tester with easy operation, trendy appearance and small volume.

- It is very suitable for all water quality testing, water purification applications, waste water regulations, aquatic cultures, hydroponics, laboratory and scientific tests, pools, ecological tests, silver of colloids, water treatment, etc.

Details

Lock Function: Easy to read and record and press HOLD button and remove from test solution.

4 display modes: press the SHIFT button. TDS - ppm&°C, EC - μs/cm&°C, TDS - ppm&F, EC - μs/cm&°F.

5-minute auto shut-off feature means no battery drain

Measurement Range: Conductivity: 0 - 9990 μs/cm

TDS: 0 - 9990 ppm

Celsius Temperature: 0.1 - 80.0°C

32.0 - 176.0 °F

Accuracy: ±2

How to operate

1: Remove the protective cap of the electrode before use.

2: Press the on/off button and dip the meter to resolve it. (The solution should not be more than a soaking line)

3: After the numerical display is stable, press the HOLD button and remove it from the solution to check the results.

4: After use, wipe the electrode cleanly, turn off the meter and put the protective cap back into place.

Note

- Due to different monitor and light effect, the actual color of the item may be slightly different from the color shown in the pictures. Thank you!

-Please allow slight measurement deviation due to manual measurement.

List:

1 x Water Test Pen (Batteries Included)