How to Use: Clean the surface of the treated area and dry thoroughly. Spread the fabric over the ironing board and place the tape over the seams and fabric seams. If you cut the corners of the tape roundly, it will not peel off. Place a thin cloth such as a handkerchief on top of the seam tape and iron on a dry setting for a low medium temperature (approximately 10 - 18 seconds) and temporarily fasten the tape tip, then press it with heat to make it easy to adhere straight. Press with iron to keep the tape in place. Iron temperature: Synthetic fiber: Low temperature (approximate): 248°F (120°C); Cotton: Low temperature (approximate): 350°F (160°C); *The 2-layer fabric is very thin, so please layer a handkerchief when temporarily fastening tape, and test adhesive in about 12 seconds. Too much ironing will damage the fabric. Please adjust the temperature and time while checking the adhesive conditions of seam tape. Too much temperature rises a burden on the fabric. Repeat work while making sure the seam tape is firmly attached. After thermal pressing, the adhesive will be stronger when cooling. Are your outdoor gear in perfect condition? Does your rain jacket get soaked in water? In the rainy season, you want to avoid rain leakage. Hydrolyzes may cause the tape to float white or brown degradation. Seam tapes deteriorate faster than the garment body. Use seam tape to reposition and repair for comfort. Hydrolyze: Polyurethane resin chemically reacts to humid environments and moisture and makes the surface torn.
Ironing directly on the processed fabric may cause the fabric to melt. Please unplug the iron from the outlet for safety when you leave the work area or when youre finished. Do not apply to PE (Polyethylene) cloth. Heat may cause fabric to melt (such as blue sheet)