Haikyu Parts MGST-C30 Magnetic Setter 2, For 0.1 inch (3.0 mm) Magnets, 1 Piece Set, Hobby Material
A must-have for magnetic removal and removal projects that accept magnets just by sticking.
Magnet Setter 2 is a magnetic seal that can be used as a base for neodymium magnets.
The soft material fits curved surfaces and is thin at about 0.008 inch (0.2 mm), so it can be used to hold magnets even on small parts that are difficult to embed magnets.
Note for Round Cut Types
Due to the pulling effect of the process, it is slightly curved in the arch.
When applying, please press well to close the center.
Press it on a round part, such as the back end of a ballpoint pen, it will be very close.
Note
Using Model Enamel Paint to Viking with Solvents may reduce the adhesion. Do not soak in solvents for a long time.
If the adhesive is not sufficient, please reinforce it with instant glue or epoxy clear adhesive.
As this is a cut of metal, please be careful not to injure your fingers or other injuries on the edges.
Seat Size: Width 1.9 inches (49 mm), Depth 1.6 inches (40 mm), Thickness 0.01
Seal size (1 sheet): Diameter 1.1 inches (29 mm), Thickness 0.008 inches (0.2
This product is made for hobbies. Please prepare tools and adhesives separately.
Does not include adhesives, paint, tools, batteries, etc. other than this product.