Feature(may vary by option.)

●Mono Wireless Magnetic Acceleration Sensor Wireless Tag TWELITE CUE BLUE and USB Stick MonoSTICK Mono Stick

[TWELITE CUE RED SET]




[TWELITE CUE RED]




[TWELITE CUE BLUE SET]





Description

Mono Wireless Magnetic Acceleration Sensor Wireless Tag TWELITE CUE BLUE and USB Stick MonoSTICK Mono Stick.



From the Manufacturer



MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

Please prepare a coin type battery (CR2032) separately.

Acceleration sensor and magnetic sensor to notify the state of things

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

Notifies movement and vibration.

Attach it to the object and send it wirelessly with movement (shock, vibration, incline, fall, move, open and close)It can be attached to a motor, compressor, pump, etc. to monitor vibrations, and can be used for monitoring operational status and predictive maintenance.

Notifies you to open and close items

Attaches to a mono and lets you know when opening or closing with or without a magnet.You can understand the actions of people by checking the door closes or knowing the door is opened.You can also install it on your factory equipment to know the working status.

Notifies the position of the items

Attach it to the object and send it a regular beacon, and the reception intensity of the radio signal received can tell you the approximate position of the object (presence detection, proximity detection).

How to put batteries

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

1

Insert the + side of the CR2032 battery in the direction of the battery holder (+).TWELITE CUE LED flashes 3 times, it is normal.

2

Send every 5 seconds after startup, LED flashes once when sent.(Transmission intervals can be changed in settings)

How to put in the case

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

MW-B-CUE-0MW-B-CUE-0

1

2

Clip it onto the nail at the edge of the case as shown in the circular marking.

3

Screw down if necessary.Screw holes can be used to thread straps or secure objects

MW-B-CUE-0MW-B-CUE-0

Preparation for parent and intermediate machines

Parent unit is required as a communicator.Not for use with TWELITE CUE alone.If you want to extend the transmission distance, you can use the relayer.MONOSTCK - Mono Stick can be used for the parent unit, relay machine.