This is a 2.0" TFT LCD expansion board with serial SPI interface. This display contains a controller with RAM buffering, so there is little to no microcontroller jobs. Pull out the TFT pin and the breakout pin pitch is 2.54mm, so the secondary development is not so difficult.
Pull out the PAD pin and solder the pin header to connect to the breadboard or use the DuPont cable to connect to the Arduino board.
It is also connected to SMD pins (half hole process) so you can solder it to an experiment PCB board or your own designed board. It is perfect for designing great projects.
RTC modules allow you to design your clock.
The NFC reader module allows you to create an access control system on a photo show.
- Can be used directly to display letters, graphics and BMP format images.
-Compatibility: The logic level is compatible with 3.3V 5V, so it is compatible with Arduino Board (Arduino UNO R3 / Arduino Nano / Arduino Mega2560 / Arduino Leonardo) or other 3.3V MCU.
- Resolution: 176 x 220, 16-bit (262,000) color
-Display Size: 2.0";
-Operating Voltage: 3.3-5.5V;
-Logic Level: 5V or 3.3V
- Working current: Max 80mA
-IO port package: Both SMD and PAD are available, the pin pitch is 2.54mm.
-Onboard backlight control circuit. You can use PWM to control the brightness of the LCD
- Great for DIY projects
Package included: 1 x 2.0 " 176 x 220 Serial SPI TFT LCD Shield Breakout Module for Arduino Nano Pro Mini UNO R3 Mega2560