HSCs biggest hit!! Over 4,000 pieces sold in 8 years since development. Point: There are over 100 installations in vehicles with the best condenser in vehicles. (such as VW or Mini) Low cost high performance tuning parts for current cars! Experience the amazing effect! Recommendation points: 1) Will not break permanently. 2) Strong spark 3) No rough contact surface 4) 6V - 24V & magnetic ignition vehicles are also OK. 5) All domestic and foreign cars are OK! For added durability, we recommend installing two hypercapacitors (positive and negative sides of the coil) Compatible models for reference: *Please check the manufacturers website for compatibility and installation. Also, please install it by a professional with knowledge.
Beware of imitation and imitation products. Recently, we have confirmed that imitation and imitation products are sold at our hyper-capacitors on the internet shopping site. These imitation and imitation products are very similar to our products in shape and specifications, but they are not designed and produced by our company, but the quality and performance are very different. We will take adequate actions including legal measures for the manufacture and sale of imitation products Please be aware that the seller is HSC. Although it is made to withstand constant tension, vibration, and heat, excessive bending or pulling of the wire may cause the condenser and iron plate to break off, and the connection between the wiring is broken, so please be careful not to install it in places where there is too much strain on the wiring. The condenser body is also made of ceramic, so please be careful not to install it in places where continuously hits the engine vibrations adjacent to hard objects such as frames. Please be aware that the product performance is not covered by a replacement product that may be shortened or replaced. In addition, when pulling out with a nipper, etc., in order to peel off the wire coating during processing, please use the wire with the condenser itself, so as not to put strain on the wire connection. When installing on a battery, please have enough slack to avoid installing it while the wiring is attached. Please note that we are not responsible for vehicle failure or injury caused during installation