Holz Car Paint Four Features

(1) Concealing force: Strong color development and high concealing power, reducing the number of applications and excellent work.Feature 2: Resistant to peeling: Strong adhesion to prevent peeling after painting.

(3) Rust Resistant) Highly rust resistant and prevents rust from forming after painting.4. Scratch Resistant: Balance the hardness of the paint film, not too hard.

With solid color paint (solid color like white and red)

Use a primer or prasaf, and apply a primer to paint.If you do not apply a base coat properly, it may cause rust and paint peeling.Although we apply a car paint over a primer coat, please make sure that todays solid color cars may have a clear overlay.

For metallic and pearl mica coatings

Just like solid colors, apply a solid base coat and apply car paint.For metallic and pearl mica paints, clear coat is essential to last.By applying clear overlapping it to create a glossy, and the original color.

For white pearl mica paint

Like solid colors, apply a solid base coat and apply a white pearl primer and then coat over the white pearl in sequence.If you do not paint both of them will not be the original color, so be sure to use them in a set.Finally, you can apply the clear coat to create a glossy finish and achieve the original color.

For painting bumpers.

When applying bumpers, door mirrors, spoilers, and aero parts, etc., it is necessary to adhere strongly to plastic, urethane and PP materials and prevent overcoat paint from becoming tangled.

Holtz Bumper Primer

For bumpers or spoilers, we recommend using Holtz primer to increase the adhesion of the paint before applying plasaf.FRP material is a dedicated product.

Please search the color number first.

When you look at the passenger or driver door, inside the engine compartment, behind the hood hood, in the trunk or behind the trunk panel, the color number indicates the body color.When selecting the spray or color touch required for your repair, choose the item number that matches the color number.

degreasing work as a prep

Spray oil and dirt on the area of your car paint with a silicone remover and wipe it off with a clean towel.If oil is left on the painted surface, it can lead to trouble such as denting the paint film.

Apply Prasafu (primer).

Until the base is invisible, it can be subjected to 3 to 5 times and layered at 10 to 15 minutes intervals, and dried for 30 minutes or more.Apply water to #1000 water resistant sandpaper and lightly polish without applying force to the extent that the entire surface of the plasaff painted surface will disappear.

Paint Car Paint

Shake the can well before painting.Dont forget to shake cans from time to time while painting.The distance from the painting surface is 15-30cm.Move in a constant direction with a speed of about 23.6 inches (60 cm) per second.Dry at intervals of 10-20 minutes and repeat application.

Apply Clear Paint

Thinner than a car paint area and apply at about 7.9 inches (20 cm) and 4 to 6 times (15 to 20 minute intervals).Be careful as it will drip if the distance is too close or too slow.If you apply a thick coat from the beginning, the color surface and the surface of the coat will melt and cause unevenness.

Apply bocacci

Boccasi agent is used around spray dust (color rough) that can be applied after painting.This is an excellent product that dissolves spray dust and makes the color border between repair areas and surroundings.