Feature(may vary by option.)

●A retrofit mirror with a wide angle of field of view that does not protrude
●Genuine Murakami 7225 mirror fits mirror with a wide angle view behind
●Adopts a curved mirror (1400R) with a wide viewing area
●Dedicated design does not protrude out; just stick it on
●1.9 times greater visibility than factory mirrors
●Significantly reduces the glare of the high beam (halogen bulbs) of the subsequent vehicle
●Recommended models: C-HR, Vitz, Alphard, Voxy, Esquaia, Corolla Sports, Prius α, Yaris, Step Wagon, and Fit. *Other models can be installed with Murakami 7225 vehicles

[blue]

[Chrome]

Description

Product Description

1. Wide mirror designed specifically for Murakami 7225.
The same size as the Murakami 7225 mirror used in many domestic vehicles, but the rear area looks very wide angle.
2. It does not protrude from the original mirror, making it ideal for compact cars.
The existing aftermarket mirror is larger than the original mirror, so it may interfere with the sun visor, especially on light cars and compact cars.
The Fit Mirror is designed specifically for Murakami 7225 and does not protrude from the original mirror after installation, so it does not interfere with the sun visor.
·It has a clean design that looks like a genuine product.
The edges of the Fit Mirror body are chrome plated frame covering all the way around so it looks like a frameless mirror.
3. Wide angle view with 1400R curved mirror.
The field of view is approximately 2 times the area of the actual mirror, giving you a wider field of view.
Compared to the original mirror, the viewing area is more effective.
4. To install, simply attach it to the original mirror with the included double-sided tape.
Easy to install with 5 double-sided tape locations.
No special tools are required, so anyone can install it with confidence.

Recommended Vehicles:
Aqua NHP10 December 2011 - June 29 (2017)
Alphard H2#W Series (20 Series) May 20 (2008) - January H27 (2015)
Alphard H3#W series (30 series) H27 (2015) January and above
Wish ZGE2#G/ZGE2#W Series (20 Series) H21 (2009) April to October 29 (2017)
Vitz P13# Series (130 Series) H22 (2010) December H29 (2017) January
Vellfire H2#W Series (20 Series) H20 (2008) May - January H27 (2015)
Vellfire H3#W series (30 series) H27 (2015) January and above
Voxy R8#W/R8#G series (80 series) from January 26 (2014)
Esquire ZRR8#G/ZWR80G series (80 series) H26 (2014) October
Estima R5#W Series (50 Series) January 2006 - May 28 (2016)
Estima Hybrid AHR20W H18 (2006) June - May 28 (2016)
Spade NCP14#/NSP14# Series (140 Series) H27 (2015) July
Noah R8#W/R8#G series (80 series) from January 26 (2014)
Hi-Ace H2#V/H2#K Series (200 Series) H16 (2004) August and Up.
Passo KGC3#/NGC30 Series (30 Series) H22 (2010) February - April H28 (2016)
Prius ZVW3# Series (30 Series) May 21 (2009) - December 27 (2015)
Prius α ZVW4#W Series (40 Series) H23 (May 2011)
Porte NCP14#/NSP14# Series (140 Series) H27 (2015) July
Yaris KSP21#/MXPA1#/MXPH1# Series R2 (2020) From February
From April 2015 S660 JW5 H27
Odyssey RB3-4 Series H20 (2008) October to November 25 (2013)
Shuttle GK8-9/GP7-8 Series H27 (May 2015)
Step Wagon RK1-7 Series H21 (2009) - April 27 (2015)
Step Wagon RP1 - 5 Series H27 (2015)
Stream RN6 - 9 Series H18 (2006) July - May 26 (2014)
Fits GE6-9, GP1, GP4 series, October 2007, September 25 (2013)
Fits GK3-6/GP5-6 Series H25 (2013) September to R2 (2020) February
Fit GR1-8 Series R2 (February 2020) and above
Freed GB3-4/GP3 Series May 20 (2008) to September 28 (2016)
Biante CC#W Series July 2008 - February 2018
Outlander GF#W H24 (2012)
Delica D: 5 CV#W series H19 (2007) from January
COPEN LA400K H26 (2014) From June

Before you buy

This product is for use with the genuine Murakami 7225 mirror.
Please check the engraving on the back of the original mirror before making your purchase.

Installation Instruction
1. Clean the oil on the car mirror surface with a diluted neutral detergent, wipe with water, then wipe with a dry cloth.
2. Peel off the 5 pieces of paper on the back of this product.
3. Match the original mirror and press it for about 30 seconds.
The adhesive strength is reduced, so it cannot be repositioned.
Please leave it without touching it for 24 hours to stabilize the adhesive.
If the temperature of the surface is low, the double-sided tape will become easier to peel off. When installing in an environment with a temperature below 31°F (15°C), please heat the surface of the surface of the product to about 104°F (40°C) (around human skin).

ATTENTION PLEASE READ.
Do not install anywhere other than designated locations.
Do not use tissue or fabric containing alcohol ingredients, water repellent, or abrasive wax.
This product is a curved mirror, so the distance of the view is different from the genuine mirror.
Do not install on vehicles equipped with a driving support system. May not work properly.
The original mirror anti-glare function will not be used when this product is installed.
Depending on the grade and year of the product, Murakami 7225 may not be used. Please make sure your factory mirror is Murakami7225 when you purchase.

Safety Warning

Do not install anywhere other than designated locations. Do not use tissue, fabric, water repellent or abrasive wax with alcohol ingredients. This product is a curved mirror, so the distance of the view is different from the genuine mirror. Do not install on vehicles equipped with a driving support system. May not work properly. The original mirror anti-glare function will not be used when this product is installed. Depending on the grade and year of the product, Murakami 7225 may not be used. Please make sure your factory mirror is Murakami7225 when you purchase

From the Manufacturer

Installation Instruction

1. Clean the oil on the car mirror surface with a diluted neutral detergent, wipe with water, then wipe with a dry cloth.

2. Peel off the 5 pieces of paper on the back of this product.

3. Match the original mirror and press it for about 30 seconds.

The adhesive strength is reduced, so it cannot be repositioned.

Please leave it without touching it for 24 hours to stabilize the adhesive.

If the temperature of the surface is low, the double-sided tape will become easier to peel off.When installing in an environment with a temperature below 31°F (15°C), please heat the surface of the surface of the product to about 104°F (40°C) (around human skin).


It does not protrude so you can see it from outside the car. This product looks cleaner than typical aftermarket mirrors. Since there are fewer protrusions from the original mirror, it is comfortable to wear without any afterwards.	Easy to install. To install simply attach the mirror with adhesive tape to the factory mirror. No tools needed.	● Check genuine mirrors Please check the manufacturer behind the original mirror before purchasing.