[red]

[Silver]

[blue]

[Black]

[10.1 fl oz (300 ml) Cylindrical Oil Catch Tank]
This product is intended for you to enjoy driving on public roads or on public roads.
Not only can it prevent oil deterioration, but also dress up your car.

Prevents oil deterioration
There is a place to store gas before putting it back into the intake, which can remove any liquefied impurities as possible.
In addition, if there is a lot of oil in the oil catch tank due to a low ride, you may have trouble with the engine.
This will help you find trouble early

Compact:
A compact body with high freedom of installation.
Made of lightweight and durable aluminum.


Universal Oil Catch Tank:
In order to accommodate a variety of car models, we have 3 types of hose calibers, 0.2 inch (6 mm) type, 0.3 inch (8 mm) type, and 0.4 inch (1

Universal oil catch tank for most vehicles.

Suitable for Subaru / Mazda / Suzuki / Toyota / Nissan etc.

Recommended not only for motorsports vehicles, but also for diesel cars that are prone to blow by gases.

[Installation]
Attaches to stays.
Prepare nuts, bolts and mounting stays, and attach the stays to the brackets of the oil catch tank.

Bolt installation
Attach bolt to oil catch tank

Hose band attachment
Fix the hose band to the hose to prevent loosening caused by vibration.


Package Contents:
1x 300ml Oil Catch Tank
2x OD:10mm Bolts (ID:6mm)
2x OD:12mm Bolt (ID:8mm)
2x OD:14mm Bolts (ID:10mm)
1 x OD: 0.4 inch (10 mm) diameter hose (length: 29.5 inches (750 mm)
Hose Band
6 x O Rings
Mounting Hardware

[About Accessories]
Stainless Steel Wool: Cut the length you need and put it in the tank for better oil filtration effect.

Sealing Tape: Seal the gap between the screw connections to prevent leakage.
Hose band: Vibration can prevent loosening
O-Ring: The bolt has an O-ring washer to prevent oil leakage.

Oil Gauge: You can detect the liquid level without opening the lid.
Baffle: cools oil vapor into a liquid and stores into the base.
Hose:Eliminates odors

Product Specifications:
Material: High quality aluminum
Volume: 10.1 fl oz (300 ml).
Size: Approx. Diameter 2.7 inches (68 mm) x Height 4.3 inches (1
Hose size: Approximately 0.4 inch (10 mm), 0.3 inch (8 mm), 0.

Please prevent air leakage with silicone caulking for the tank inlet and exhaust outlet. The hose connecting to the intake side is connected to a horizontal position or higher than the intake side so that the oil does not accumulate inside. Please be careful that the hose will not be sagged. Please be aware that there may be slight differences in size and individual measurements.
We cannot support the use of this product.
As this is an imported product, there may be scratches, scuffs, or crushed on the exterior.
We will not be responsible for any problems caused by installation or use.
Depending on your monitor settings, there may be slight differences in the color of the product.
Instruction manual not included. Please acknowledge