Guidance Aid:
First, place the whetstone base to idle for 1 minute and make sure it is firmly fixed. Yes. Otherwise, it will not be direct polished. This can cause unevenness in the grinding head wear and abrasive areas.
How to set it up?
1. Use a small wrench to twist the fast grinding head that rotates until the grinding head is stable. Then it is strictly prohibited. The adjustment method can be adjusted by loosening the spindle.
Turn the grinding head diagonally or a little longer and tighten it before
Tighten 2. Fill with water to cool (similar to hospital drip system) When heated drying is used, the diamond on the grinding head is made of graphite which accelerates wear and scrap.
3. Please do not shake when drilling The sway causes the whetstone head to be partially damaged, which promotes damage to the whole whetstone head.
4. The speed should be as fast as possible and the line speed is usually at least 10-20 meters.
5. Light pressure is too strong, the grinding grain will not fall off, and the grinding head (especially small diameter heads) will be easily damaged.
6. The water diamond grinding head can improve the wear-resistance and sharpening of the grinding head and improve the service life.
Specifications:
Project Type: Diamond Cutting Kit
Material: Diamond
Tool Handle Diameter: Approx. 3mm
Length: Approx. 45mm
Packing List:
Diamond Drill Set (30 Pieces)