Feature
●Feature 1: Just add a handkerchief. Feature 2: Approx. 500 continuous impressions. Feature 3: Easy stamp height adjustment
●Feature 4: Accurate impression with alignment guide. Feature 5: Equipped with slide lock mechanism. Feature 6: Change sateen with one touch
●Mechanism: One-touch type. Compatible size: 0.4 - 0.5 inches (10 - 12 mm) (0.4 inch (9 mm) with the included seal)
●[Specifications] Body Material: ABS resin, POM resin
●Size: 1.0 x 0.8 x 3.8 inches (25 x 20 x 96 mm); Weight: 0.6 oz
Description
Just insert the handkerchief in your hand and you can turn it into a one-touch stamp as it is.
Approximately 500 continuous impressions on one ink cartridge. Simply slide it sideways, and you can easily attach and remove the cartridge.
There is an indication on the center of the transparent frame that touches the paper, so you can align the impression while looking at the tip of the seal.
The stamp height is adjustable without the need to use a coin, and you can easily adjust the sateen by simply turning it with your fingertips.
Equipped with a slide lock mechanism to prevent accidental operation in bag or pocket.
Compatible with 0.4 - 0.5 inch (10 - 12 mm) stamps, and you can also use the included rotating seal to make a diameter of 0.4 inch (9 mm) The length of the corresponding seal is 2.2 - 2.4 inches (57.5 - 61.5 mm).
From the Manufacturer
Mitsubishi Pencil Stamp Holder Hanzo
Simply set the handkerchief to turn it into a one-touch seal.
Equipped with a slide lock mechanism to prevent accidental operation in bag or pocket.
Easy Impression Adjustment: No need to use a coin, you can adjust the stamp height by simply turning it at your fingertips, and it will fit your sinka. Slide Lock Mechanism: The slide part can be locked with a single button to prevent accidental operation in your bag or pocket. One-touch sateen replacement: Simply slide it sideways, and you can easily remove and remove the cartridge. Dedicated refill cartridge HLS-2
The photo is for illustration purposes only, color and shape may differ depending on the model number selected.
|
|
|
|
|---|---|---|
Just insert your own handkerchiefJust insert the stock handkerchief and you can turn it into a one-touch stamp that can be continuously impressioned. |
Compatible with 0.4 - 0.5 inch (10.0 - 12.0 mm) StampIf you attach the included "circle-stop" seal, you can also use the 0.4 inch (9 mm) diameter round and small stamps. Please note that the length of the corresponding seal is 2.2 - 2.4 inches (57.5 - 61.5 mm). |
Dedicated refill cartridge HLS-2 |
How to remove and install the sateen from the Hanzo
How to remove
1. Press the "Slider" to keep the impression visible and lock the "Slider" in the "Lock Button.
2. Look at the stamp and slide the cartridge to the right, and remove it.
Installation
3. When installing a new cartridge, in order to avoid too much ink on the stamp, turn the adjustment knob (-) and push the seal back into the main unit.
4. In 2 state, align the grooves of the new cartridge and the grooves on the main body, then slide it in the opposite direction and push it until you hear a "snap".
5. Remove the lock, the sateen cartridge will return and the skew will stick to the stamp surface.Check the impression several times and if the image is missed or thin, turn the adjustment knob little by little to adjust the amount of ink.Please note that if you put the seal too much out, the sateen will not stick to the entire surface.
Please use HLS-2 refill cartridges.