Feature

●♥ Strong adhesive aluminum foil tape: Heat conductivity, conductivity, strong adhesive, heat resistant, waterproof, durable, weather resistant, corrosion resistant, and will not peel off even if it gets wet. Can be applied over the top of the paste
●♥ Easy to install: The release paper design allows you to cut it off as much as you need. Excellent flexibility and is ideal for wrapping and striking work such as piving
●♥Excellent durability and weatherproof: It is resistant to deformation, discoloration, and deterioration, and is resistant to water, heat, and light, and durable. Long lasting use
●♥ Double-sided Conductivity: Aluminum foil + conductive synthetic resin adhesive with Ni powder is added to ensure complete conductivity. The vertical direction (thickness direction), and the surface direction can be achieved with high conductivity and thermal conductivity. Conductivity: Conductivity is the ability to conduct electricity; Conductivity; Difficult to pass through electronics; Insulating decides its less electrical transfer (electrical resistance) metal has better conductivity
●♥ Wide range of uses: kitchen surroundings, stove repair, dirt prevention, plumbing and duct reinforcement, winter water pipes freezing protection, ground removal, cars, computers, and other uses include waterproofing processing of metal roofs and exterior walls, air conditioning ducts, heat insulation, discharge, corrosion-resistant, and floor heating plates. For indoor and outdoor use, such as lipping and kitchen! Also great for DOY


Description

Product Details:
Width: 0.8 inch (20 mm) wide
Thickness: 0.06 mm
Length: 164 ft (50
Tensile Strength: 3.7/37 (kgf/cm, N/cm)
Adhesiveness: 460/4.5 gf/cm, N/cm
Contact Resistance Measurement Method 3M Method #1
Heat and cold resistant temperature range: -30 - 250 degrees Celsius
Certification: UL510(FR)
Base Material: Soft aluminum foil
Adhesive: Conductive acrylic (contains conductive Ni powder)
Color: Silver
Product uses: electronics, electrical parts, and equipment. For electromagnetic shielding, ground removal, electrostatic removal, cable and connector shielding, housing shielding, switching transformers and other short-rings.
Special Features: Heat conductivity, conductivity, strong adhesion, and heat resistance (can be used up to 350°F (250°C). Waterproof, durable, weather resistant, and corrosion resistant.
Product Contents: 0.8 inch (20 mm) wide aluminum tape x 1, cutting cutter (scissors) x 1.
Will not peel off even if it gets wet.
You can stick it over the top of the paste.
Please be aware that there is no instruction manual (English language not guaranteed).

Note:
1. This product will be delivered in an envelope instead of placing it in a PP bag. Please be aware of this before purchasing.
2. There may be slight scratches on the surface of the product outer 1st round. Please peel off the first circle before use.
3. Please use gloves when working, as there is a risk of cutting your hand at the end of the tape.
4. Do not use in high heat.
5. Do not use if the adhesive is not adequately adherent to rough surfaces.
6. When removed, the substrate may be damaged or left behind behind
7. Clean the surface thoroughly from dust, oil and moisture.
8. Do not use for anything other than the intended purpose, such as electrical insulation or stick to your skin.
9. Store in a cool place away from direct sunlight.
10. This product is for repair purposes only and does not guarantee a complete repair.
11. The image is for illustrative purposes only and may not be a different from the actual product.
12. Product specifications may change without prior notice in order to improve and improve quality.