Product Description

Carbon style black edition series.
The Carmate Black Edition series features a carbon-like design with a sporty look that is increasing in the vehicles interior.
In addition, you can enjoy black with different expressions even in solid colors with two types of black (gloss black) and matte black).
By installing this product, you can create a sporty and luxurious interior space.

Black Edition Series Stick-on Smartphone Holder
This is a smartphone holder that attaches with adhesive tape from the Black Edition series.
Easy to follow mounting base allows you to attach it to curved surfaces on your dashboard.
Requires smooth surfaces that are at least 2.8 x 2.0 inches (71 x 51 mm). Cannot be applied in places where the main body is facing downwards, curved surfaces, flocked areas, fabric surfaces, and large uneven areas.
Do not install on dashboards with genuine leather, synthetic leather, or soft skin (*reference to representative models). The mounting surface may be damaged or leaving traces of installation.
Representative models of dashboards that cannot be installed (as of September 2021.9)
Toyota: CH-R, RAV4 (H31.4~), Crown Type, Harrier
Subaru: Forester (H30.7~)
Mazda: General
Lexus: General
Import vehicles: General

Compatible with various smartphones.
The size and weight of a smartphone that can hold (Width: 2.2 - 3.5 inches (55 - 88 mm); Weight: Less than 7.8 oz (220 g); so it can be used with Even with a case on, it can be held within the size that can be hold.
Depending on the shape of the case, there may be cases where the ring is attached to a drop prevention prevention ring, or the shape of the case.
If there are controls or functions on the side of the smartphone, it may not be used when holding it. (The height of the arm that touches the smartphone is about 1.4 inches (35 mm)).

The paste base follows both flat and curved surfaces.
The base of the paste is shaped and material that is easy to follow on curved surfaces, so it can be applied to both flat and curved surfaces of your dashboard. In addition, the adhesive tape is strongly attached to the resin surface of the dashboard or the panel and is made with double-sided tape that does not leave residue when removed.
Requires smooth surfaces that are at least 2.8 x 2.0 inches (71 x 51 mm). Cannot be applied in places where the main body is facing downwards, curved surfaces, flocked areas, fabric surfaces, and large uneven areas.
Do not install on dashboards with genuine leather, synthetic leather, or soft skin (*reference to representative models). The mounting surface may be damaged or leaving traces of installation.
Representative models
Mazda: CX-5/CX-8
Toyota: Crown / Harrier / CH-R
Import vehicles: General (as of January 2019)
Please do not use this product on a window glass.

Easy one-handed quick hold
First set the arm of the holder to fit the width of your phone and then it can be easily held with one hand. Simply hold your smartphone inside the arm and push it in, and the power of the spring from the side will hold your smartphone. In addition, the structure of the holding smartphone can be unlocked by simply pulling it forward, so it is easy to remove without any hassle.
If you feel the hold is weak, please set the width to be tighter.
If you use a smartphone cover made of soft material, the smartphone may be difficult to remove from the holder.

Smartphone friendly material selected.
The parts of the left and right arms that touch the smartphone are made of elastomer resin that combines the texture of rubber and high durability. Therefore, it will not rattle even while driving. It will not scratch your smartphone. It also prevents vibration noise while driving due to contact with the smartphone and holder.

Can hold while charging.
The design holds your smartphone on the left and right arms, so you can charge and hold your smartphone with the charging terminal at the bottom.
If the charging terminal is located on the side, charging may not be possible while holding it. (The maximum point where the smartphone touches the left and right arms is approximately 1.4 inches (35 mm) longer.)

Ball joint with wide adjustment range
By joining the base and holder with a ball joint, you can freely adjust the angle up and down to left and right (up to 50°). The ball joint part is a threaded type, so when you decide the direction of the holder, you can tighten the screw to fix it. If you want to change the orientation, simply unscrew the screw and adjust it many times.

Uses carbon-like design for a sporty look.
Uses carbon-like design for a sporty look that is growing in the interior of your vehicle, and this product can also be used to dress up your vehicle.


● Before you buy
(Can be holded)
·Compatible with smartphones with a width of 2.2 - 3.5 inches (55 - 88 mm) and a weight of 7.8 oz (22
※When case is installed, the width/weight including the case is within the corresponding range.
Depending on the shape of the case, there may be cases where the ring is attached to a drop prevention prevention ring, or the shape of the case.
Even if the size is holdable, it may interfere with the volume control button, power button, etc. depending on the model, the case is attached/uninstalled, and the shape of the case.

Requires smooth surfaces at least 2.8 x 2.0 inches (71 x 51 mm).
Cannot be applied in places where the main unit is facing downward, curved surfaces, flocked areas, fabric surfaces, and places with large uneven surfaces.
Please do not install on dashboards with genuine leather, synthetic leather, or soft skin (*2, refer to representative car models). The mounting surface may be damaged or leaving traces of installation.
2 Representative models of dashboards that cannot be installed (as of September 2021.9)
Toyota: CH-R, RAV4 (H31.4~), Crown Type, Harrier
Subaru: Forester (H30.7~)
Mazda: General
Lexus: General
Import vehicles: General


Caution: Please read this product.
Operation of smartphones or other devices while driving is prohibited by law. Stop in a safe location before operating.
Please do not install on windshields or side glass for driver and passenger sides as this will violate the "safety standards for road transportation vehicles".
Do not install in places that interfere with the airback operation or driving.
Before use, please make sure that the product and smartphone are firmly fixed. It may fall off or fall off.
Do not use on harsh driving or bad roads.
Do not leave your smartphone in the car.

Indications

(Width: 2.2 - 3.5 inches (55 - 88 mm); Weight: 7.9 oz (220 g) or less

Safety Warning

Please check the precautions for use before using this product

From the Manufacturer

Carbon style black edition series.

The Carmate Black Edition series features a carbon-like design with a sporty look that is increasing in the vehicles interior.

In addition, you can enjoy black with different expressions even in solid colors with two types of black (gloss black) and matte black).

By installing this product, you can create a sporty and luxurious interior space.

Black Edition Series Stick-on Smartphone Holder

This is a smartphone holder that attaches with adhesive tape from the Black Edition series.

Easy to follow mounting base allows you to attach it to curved surfaces on your dashboard.

Requires smooth surfaces that are at least 2.8 x 2.0 inches (71 x 51 mm).Cannot be applied in places where the main body is facing downwards, curved surfaces, flocked areas, fabric surfaces, and large uneven areas.

Do not install on dashboards with genuine leather, synthetic leather, or soft skin (*reference to representative models).The mounting surface may be damaged or leaving traces of installation.

Compatible with various smartphones. The size and weight of a smartphone that can hold (Width: 2.2 - 3.5 inches (55 - 88 mm); Weight: Less than 7.8 oz (220 g); so it can be used withEven with a case on, it can be held within the size that can be hold. Depending on the shape of the case, there may be cases where the ring is attached to a drop prevention prevention ring, or the shape of the case. If there are controls or functions on the side of the smartphone, it may not be used when holding it. (The maximum point where the smartphone touches the left and right arms is approximately 1.4 inches (35 mm) longer.)	Easy one-handed quick hold First set the arm of the holder to fit the width of your phone and then it can be easily held with one hand.Simply hold your smartphone inside the arm and push it in, and the power of the spring from the side will hold your smartphone.In addition, the structure of the holding smartphone can be unlocked by simply pulling it forward, so it is easy to remove without any hassle. If you feel the hold is weak, please set the width to be tighter. If you use a smartphone cover made of soft material, the smartphone may be difficult to remove from the holder.	The paste base follows both flat and curved surfaces. The base of the paste is shaped and material that is easy to follow on curved surfaces, so it can be applied to both flat and curved surfaces of your dashboard.In addition, the adhesive tape is strongly attached to the resin surface of the dashboard or the panel and is made with double-sided tape that does not leave residue when removed. Requires smooth surfaces that are at least 2.8 x 2.0 inches (71 x 51 mm).Cannot be applied in places where the main body is facing downwards, curved surfaces, flocked areas, fabric surfaces, and large uneven areas. Do not install on dashboards with genuine leather, synthetic leather, or soft skin (*reference to representative models).The mounting surface may be damaged or leaving traces of installation. Representative car model: Mazda CX-5/CX-8; Toyota: Crown type/Harrier / CH-R; Imported cars: General (as of January 2019)

Smartphone friendly material selected. The parts of the left and right arms that touch the smartphone are made of elastomer resin that combines the texture of rubber and high durability.Therefore, it will not rattle even while driving. It will not scratch your smartphone.It also prevents vibration noise while driving due to contact with the smartphone and holder.	Ball joint with wide adjustment range By joining the base and holder with a ball joint, you can freely adjust the angle up and down to left and right (up to 50°).The ball joint part is a threaded type, so when you decide the direction of the holder, you can tighten the screw to fix it.If you want to change the orientation, simply unscrew the screw and adjust it many times.	Can hold while charging. The design holds your smartphone on the left and right arms, so you can charge and hold your smartphone with the charging terminal at the bottom. If the charging terminal is located on the side, charging may not be possible while holding it. (The maximum point where the smartphone touches the left and right arms is approximately 1.4 inches (35 mm) longer.)