Feature(may vary by option.)
●Product Overview: This is a handy aftermarket motion sensor unit that is useful when you want to sensor lighting devices that are already installed. It can be wired between the power supply and equipment to make a variety of electronic products sensed. Small and lightweight, it is very small in size 60mm long x 45mm wide x 40mm total height and weighs only 28 grams. You dont have to worry about the motion sensor is installed after installation. For example, it can be used for lighting entrances, toilet lighting, ventilation fans, hallways and staircases, and various places to sense
●Built-in Sensor: This product is equipped with both a PIR motion sensor and a CDS illumination sensor. So it detects both ambient brightness and human movement and turns on and off. Compatible Devices and Cables: Compatible with lighting and household appliances up to 100 V AC and 100 W power consumption. The wiring cable is 20 AWG (0.5sq) and coated with Teflon coating for scratch resistance. Wire cable length is about 120mm
●Sensing Brightness Adjustment: The LUX knob allows you to adjust the ambient illumination of the surrounding power from approximately 10 lux to 2000 lux. It can be adjusted according to a variety of uses, whether you want to power it up when it is bright or when it gets dark. (Adjustment Time of Power Consumption) The Time knob allows you to adjust the power to approximately 10 seconds to 7 minutes. If you detect human movement again during power transfer, this volume knob will automatically extend the time you adjust it, so it will continue to power while it senses human motion within the sensor area
●Japanese Manual Included (English language not guaranteed) (Refer to the product description below). Sensor Body Country of Manufacture: China (our designated factory). Warranty: 1 year (Niigata Prefectures Ryudo Co., Ltd.) Japanese staff inspects the product at the time of arrival and will provide immediate and careful support) [Important] IP44 equivalent and is not waterproof. For outdoor use, you can use it on the eaves that do not get exposed to rain, but it cannot be used in places exposed to rain. When using outside eaves, please make sure to wrap vinyl tape around the cable and outlet connections to prevent water from entering. Also, make sure the unit is installed so that the adjustment knob is facing downward. If water gets injected from the crimp and connection parts, it may be shortened and broken. Please note that we will not be able to support any of these cases. [Caution] Please make sure to perform installation work for those who have a qualified electrician. This product is a triac dimmer
●(About PIR sensor) The PIR motion sensor detects changes in ambient temperature and operates, so it has the following characteristics: Even animals other than humans have heat so they can detect them. As the ambient temperature exceeds 30 degrees, the sensitivity will decrease as the temperature difference between the human body. It will not work if there is a shielding object such as walls, glass, etc. It may react to the exhaust heat of a car running on a nearby road. It can detect temperature differences due to wind convection such as heaters, and it may light up even if there is no human
●(Standby power is approximately 50 yen per year) The standby power of this product is effective at 0.2 W (actual measured in the lud). Calculated at kW 27 yen 4.8 W per day, and 144 W per month. Considering the wasted power due to forgetting to turn off the connected product, the energy saving effect is very large
●When you are planning to use it by connecting it to an air purifier or high-performance fan: It can be used with a circular or fan that turns on and off using a mechanical switch, and when the device is turned on and unplugged and unplugged, without having to press the power switch again. It is controlled by a multi-functional electronic switch such as an air purifier. If the device is turned on and unplugged and unplugged, the power switch will not be turned on if the device is turned on
[Set of 2]
[1]
Description
Product Specifications
Installation and Setting Method
