Fitment: Front
2-point closure
Car height data (with standard vehicles) Custom RS front 24.4 inches (621 mm)
Rear 24.4 inches (620 mm) / Custom X Front 24.4 inches (622 mm) Rear 24.4 inches (62
Underbrace Ground High Underbrace When Not Mounted: Muffler / 5.8 inches (147 mm) With Underbrace Attached: Muffler / 5.8 inches (147 mm)
From the clearance data body to the underbrace is about 0.2 inches (5 mm).
See Custom RS 658cc.TB.FF.CVT vehicles
See Custom X 658cc.NA.FF.CVT vehicles
The product image is of a representative car model, and not all cars are the same shape. 2 or 4 points depending on the vehicle.
·There may be cases where the ground height is not possible by installing this product. Please check the minimum ground height and car height before installation.
Depending on the vehicle, the minimum ground height of the vehicle itself is the lowest part of the vehicle. For that reason, please be careful of the mounting suspension to maintain a minimum of 3.5 inches (90 mm) above ground height required for safety standards and inspection guidelines.
The same is normal suspension and our suspension vehicles. Vehicle inspections and periodic inspections must be met with the aforementioned, but only the user of the vehicle must include the responsibility of maintenance management.
The load clearance will be reduced after installation, so please be careful when driving.
Each measurement measurement is based on our companys measurement conditions. Please use this product as a reference as it may differ depending on the model and vehicle conditions.
·Please note that the minimum ground height data is the near dator with an underbrace attachment, and is not measured throughout the vehicle.
Please note that installing this product may cause difficulty in replacing engine oil, mission oil, etc.
See Custom RS 658cc.TB.FF.CVT vehicles
See Custom X 658cc.NA.FF.CVT vehicles
The product image is of a representative car model, and not all cars are the same shape. 2 or 4 points depending on the vehicle.
·There may be cases where the ground height is not possible by installing this product. Please check the minimum ground height and car height before installation.
Depending on the vehicle, the minimum ground height of the vehicle itself is the lowest part of the vehicle. For that reason, please be careful of the mounting suspension to maintain a minimum of 3.5 inches (90 mm) above ground height required for safety standards and inspection guidelines.
The same is normal suspension and our suspension vehicles. Vehicle inspections and periodic inspections must be met with the aforementioned, but only the user of the vehicle must include the responsibility of maintenance management.
The load clearance will be reduced after installation, so please be careful when driving.
Each measurement measurement is based on our companys measurement conditions. Please use this product as a reference as it may differ depending on the model and vehicle conditions.
·Please note that the minimum ground height data is the near dator with an underbrace attachment, and is not measured throughout the vehicle.
Please note that installing this product may cause difficulty in replacing engine oil, mission oil, etc