Note:
This product does not come with an instruction manual, so please check the replacement instructions at youtu.be before replacing.
Installation requires some knowledge and techniques, so if youre an amateur it is best to ask professional work.
◆If you find any problems after installing the product, it is a little troublesome to deal with it, so please test it first after you receive the product. After testing, if there is no problem, it is better to install it on the main unit.
◆ If the product is caused by the LCD panel, you can replace the product to resolve the faulty issue, but if there is a fault other than the LCD panel, you will not be able to resolve the issue, so please check the cause of mobile phone failure before purchasing.
◆We will not be responsible for any damage or defective due to installation mistakes. Use at your own risk.
◆This product is an imported product, so there may be minor stains. We appreciate your understanding.
◆If you have any questions, please feel free to contact us.
Package Contents
1*For Panasonic Lets note CF-SX3 CF-NX3 CF-NX4 CF-SX4 12.1" Model LCD Screen Touch Screen Digitizer Assembly
1 x repair tool
After-sales service!!!
We will provide 1 month free replacement for damage to non-humans. We are not responsible for any damage or trouble caused by a mistake installation. If you need more support for any problem, please email our service team. We will do our best to provide quality services.
Sweet Tips
The screen replacement parts are very vulnerable and should be carefully and gentle when opening or installing the package. Be careful not to press on the edges or corners of the screen. It is easy to tear.
▲Do not over-bend the LCD cable. Black display when over 90 degrees.
▲Before installation, turn off the iPad and remove the battery cable.
▲Clean the LCD connector with cleaning paper(included in the package)
▲When replacing the LCD assembly, there are different dimensions and lengths, so please pay attention to the position of the screws and place it in the correct position.
▲ Carefully connect the IC line and connect the battery flexible cable.
▲Connect the battery. Restart the IPad to confirm it.
▲ If the line is out of the screen or it does not meet the touch, please remove the LCD screen and reinstall the connector.