Feature

●Portable hanging powerful, small electric winch that can be used according to the environment. No bolting is required, and you can use it immediately on business trips or sites
●This hoist is perfect for loading and unloading luggage, automobiles and more. Please hang it on scaffold pipes or other pipes
●The hook on the top of the main unit can be hung on a pipe of about 2.0 inches (50 mm) diameter. This product has a 50 Hz specification
●Wire Length: 11M | Wire Thickness (Diameter): 3mm | Power Supply: 100V (50Hz) | Motor Performance: 560W | Plug Cord Length: 135cm
●Remote Control Cord Length: 59.1 inches (150 cm), Weight: 28.9 lbs (14 kg), Set Includes: Main Unit x 1, Hook x 1, Instruction Manual (English)


Description

Electric Winch 100V Hoist Crane 50HzElectric Winch 100V Hoist Crane 50Hz

Electric Winch 100V Hoist Crane 50Hz

Portable hanging mini electric winch that can be used according to the environment.

.

No bolting is required, and you can use it immediately on business trips or sites.

.

This hoist can be used for loading and unloading luggage, automobiles and more.

.

Please hang it on scaffold pipes or other pipes.

Electric Winch 100V 50Hz Product Specifications

Wire Length 11M
Wire thickness (diameter) 3mm
Power Supply 100 V (50 Hz)
Motor Performance 560W
Plug Cord Length 135cm
Remote Control Cord Length: 150cm
Product Weight: 28.9 lbs (1
PACKAGES Main unit x 1, hook x 1, instruction manual (English)

Hanging Method: Single line

Maximum Hanging Load 285.2 lbs (12
Lift Height 11M
Lift Speed 10m/min

Hanging Method: Double Line

Maximum Hanging Load 550kg
Lift Height 5.5M
Lift Speed 5m/min

Electric Winch 100V Hoist Crane 50HzElectric Winch 100V Hoist Crane 50Hz

Electric Winch 100V Hoist Crane 50HzElectric Winch 100V Hoist Crane 50Hz

Electric Winch 100V Hoist Crane 50HzElectric Winch 100V Hoist Crane 50Hz

Electric Winch 100V Hoist Crane 50HzElectric Winch 100V Hoist Crane 50Hz

Overwind Prevention Plate

The red disc stopper on the picture will be changed to a silver plate shape.

Hook to prevent pipe from coming out

The hook on the top of the main unit can be hung on a pipe of about 2.0 inches (50 mm) diameter.

PACKAGES

Includes replacement hooks.

Installation Image

This is a movable hanging type that can be used according to the environment without having to fasten bolts.

This product has a 50 Hz specification.Please make sure your area is the corresponding frequency (50Hz).

.

The 60Hz specifications are also listed, so if the frequency is 60Hz, please purchase from a separate product page.

.

.

■Important information

Due to the nature of the stock rod, the red disc stopper shown in the picture has been changed to a silver plate shape.When using for the first time, please cut the rubber that is temporarily fastened with wires before use.(If you use it without cutting, it may be wrapped in the wire). If you use it with a long wire such as a octopus wire or cord reel, it may not be able to perform well.Use as a standalone power supply as short as possible.This product has a 50 Hz specification.Please make sure your area is the corresponding frequency (50Hz).For maximum load, please rest for about 8 minutes after using for 2 minutes.Please understand the load capacity of the main unit, and do not hang it in an unstable location or where it is not sufficiently safe.

.

.

■Disclaimer

We cannot accept responsibility or liability for any damages, injuries, or damages other than this product due to product use.

Product information