Feature

●Tap and Die Set: 14mm-12 UNC thread tap and round die 38mm diameter stock is 26mm-38mm/m12-m16 capacity with adjustable screws. Suitable for making and repairing male and female threads. Suitable for general purpose applications
●Application: Rethread your existing threads to hard materials like metal or make new screws on soft materials like plastic. Used to handle mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, hard plastic etc
●Special Design: High speed steel machine tap has high hardness and toughness for wear resistance. It features only a base board without additional coating. Adjustable screws allow mold stock to hold round dies firmly
●EASY TO USE: The positioning grooves of the die are aligned with the tightening screws in the middle of the die wrench, and the screws must be inserted into the slot of the die to tighten
●Tip: In order to facilitate discharge of the chip from the tip hole, it must be reversed every 1/4 to 1/2 turns. When tapping the thread, the proper lubricant must be added to the edge of the die


Description

Specifications:
Thread tap: Thread size: 14mm-12 UNC; Thread length: 31mm ; Corner shank size: 9mm 5; Total length: 95mm ; Resistance grade: 2b; Material: High speed steel
Round: Screw Size: 12mm; Outer Diameter: 38mm; Thickness: 14mm Precision class: 0.2 oz (6 g); Material: Tool steel (9crsi).
Stock: Size: 38mm x 14mm x 0.55 (d * h); Fit Capacity: 26mm-38mm (M12-M16); Total Length: 306mm; Material: Cast Iron


Description: Round mold is a hard material like metal and is suitable for re-tightening existing threads.
High speed steel taps make and repair female threads perfect for general purpose applications. Machine stopper has high hardness and toughness for abrasion resistance. It features only a base board without additional coating. [Challenge] Dial stock is suitable for round outer diameter of 1.5 inches (38 mm) (0.05 to 0.5 inches (1 to 12.7 mm). Provides good abrasion resistance for long service life. Adjustable screwed mold stock securely holds round shape and is easy to operate.
The die and tap set with a die wrench can greatly improve the thread processing efficiency, and is the necessary tool for hand tapping operation. Can be used to handle mild steel, aluminum, stainless steel, iron, cast iron, alloy steel, and hard plastic etc.


Package:
1 x Thread Tap, 1 x Round Shape, 1 x Die-Stock Handle Wrench