Feature(may vary by option.)
●MR115ZZ (Inner diameter = 5mm, outer diameter = 11mm, thickness = 4mm)
●Both sides are sealed by shields and holds lubricant
●Made of 440C stainless steel, more resistant to rust and corrosion
●AB EC Tolerance 1 (P0), Most Used Z2 Noise Level
●Static Rated Load (Cor): 282N Dynamic Rated Load (Cr): 716N
[2x5x2.5mm]
[4x7x2.5mm]
[8x12x3.5mm]
[5x11x4mm]
[7x11x3.0mm]
[8x13x4mm]
Description
Note: Please refer to the picture to select the correct type of bearing before ordering (sealed or shielded on both sides or on one side) The suffix of the bearing is to distinguish between shielded type and shielded type bearings. Does not affect the use of the product.
Description:
- Single row, pre-lubricated, normal accuracy
- Deep groove ball bearings are one of the most widely used rolling bearings. They are used to handle radial and axial loads in both directions.
-Small friction and high speed limit make ball bearings cost effective and require little maintenance.
- Stainless steel bearings have stronger rust and corrosion resistance.
- Suitable for all kinds of industrial equipment, micro motor, small rotating motor, office equipment etc.
Guide Selection:
Shield (Specified Sufix Z/ZZ) - High Speed Protects against dirt and debris
Sealed (specified Sufix RS / 2RS) - Made of steel plate reinforced rubber (oil and liquid resistant) Lower limit speed than sealed bearings
Specifications:
Model: SMR115ZZ Shield Type: Double Shield
Inner Lace/Outer Lace Material: 440C Stainless Steel (9Cr18)
Cage Material: 304 Stainless Steel (0Cr18Ni9)
Inner Diameter: 0.2 inches (5 mm)
Outer Diameter: 0.4 inches (11 mm)
Thickness (B): 0.2 inch (4 mm)
Working Load (Cr): 0.716kN
Static Load Rating (Cor): 0.282kN
Precision class: P0 (AB EC-1)
Noise Level: Z1
Pack Quantity: 5