Feature

●Interface: GPIO40pin > I2C
●Controller: SC16IS752
●Serial Port: D-Sub9Pin x 1, 10PinBox Header x 1. *For 10Pin Box Header > D-Sub9Pin Conversion Cable Attached
●External power terminal: 2 pin terminal block, when the D-Sub9 pin or 10 pin box is set to 5 V PUT, +5 V
●Serial Standard


Description

Insulated serial board for Raspberry Pi GPIO40Pin connector

The RPi-GP60 is a Raspberry Pi expansion board with serial communication such as RS-485/422, which is widely used in various environments.　By connecting this product to the GPIO (I2C) Raspberry Pi, you can control equipment (PC or PLC controllers such as microcomputer boards) in FA site, and measure with various measuring instruments.Supports analog and digital input and output.

RPi-GP60 ApplicationsRPi-GP60 Applications
RPi-GP60 DB9 and 10pin Box HeaderRPi-GP60 DB9 and 10pin Box Header

1 DB9 and 10 pin box header

The serial terminal included in this product is equipped with two types of DB9 and a 10-pin box header type.You can choose according to your application and connector shape.

RS232C, RS-485 portsRS232C, RS-485 ports

Supports 2 ports RS-232 or RS-485/422

The serial port of the RPi-GP60 can be changed to RS-232, RS-485/422 depending on your application.You can set it freely if you want to use RS-232 or RS-485/422 with one port each.

RS-232, RS-485/422 (Half Duplex / Full Duplex) on each port

The port can be easily operated by simply switching the jumper on the board.Each switch can be switched between RS-232 and RS-485/422 (2/4), termination settings (TERM), half duplex and full-duplex settings (F/H)

RPi-GP60 General Specification

Name: Raspberry Pi I2C Insulated Serial Board
Model No. RPi-GP60
Interface GPIO40pin > I2C
Controller SC16IS752
Dielectric pressure resistant 2.5 kV (between the serial port and the GPIO 40pin); *Non-insulated between the two serial ports
Electrostatic Pressure Resistant 15kV
Power Supply Voltage DC +5V / +3.3V (Powered by GPIO port)
Current Consumption Up to 5V/150mA, 3.3V/20mA
Operating Environment Temperature: 32 - 104°F (0 - 40°C) / Humidity: 20 - 80% (but not condensation).
External Dimensions Approximately 65.0 x 56.5 mm (not including protrusions)
Weight Approx. 1.0 oz (28 g) *Main unit board
Package Contents RPi-GP60 unit, D-Sub9 pin cable for connecting 10 pin box header (approx. 3.9 inches (10 cm), 10 short plugs for setting (2 of them already attached to the board), GPIO 40P pin header, 4 M2.6 spacers, 8 M2.6 screws, 1 supplementary document

RPi-GP60 Input/Output Specifications

Serial Port D-Sub9Pin x 1, 10PinBox Header x 1. *For 10Pin Box Header - Includes D-Sub9Pin Conversion Cable
External Power Terminal 2 Pin terminal block, when the 9 pin in the D-Sub9 pin or 10 pin box is set to 5 VPUT, the +5 V will be supplied.
Serial Standard [RS232] TIA/EIA-232F compliant *1 1 Jumper pin on board can be set up
Serial Standard [RS-485/422A (Half Duplex / Full Duplex)] TIA/EIA-485-A, TIA/EIA-422-B compliant*1 Half-duplex supports automatic transmission and reception switching 1 set by jumper pin on board
Compatible Baud Rates 110, 300, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, (115200, 230400, 460800, 921600) *I2C speed limit (standard kHz100 by 115. Flow control is recommended for 200 bps or more. *For RS-232C, the transceiver limit (650 kbps), it can be up to 460800 bps. *For RS-485/422A, it can be up to 921600 bps depending on the serial controller.
FIFO Transmits and Receives 64Byte Each

Looking for specific info?