Feature
●The system consists of individual components such as controllers, stepping motors, foot switches, power adapters, and output shafts.
●2. Max Coil Width: 100mm Count Range: 0-9999 Ring. This design makes it very easy to integrate the system into your project. You can install the motor in the right location and separate it from the controller box to reduce noise and vibration.
●3. Can be rolled around a maximum diameter of 5.9 inches (150 mm)
●4. Different sections can be set for different retrieve speeds, low noise, high speed and low torque are constant.
●5. This series of hand winding machines adopt gear transmission, pointer or electronic count.
Description
Winding Machine, Microphone, Winding Machine, Precision Automatic, Winding Machine, 2-Way 0.1 Rotation
Mechanical principle
1. Hand-crank electric count winder is powered by the drive gear of the crank handle, and the counter counts by drive gear end gear transmission.10:1 speed ratio between main shaft and counter shaft.When the main shaft rotates, the counter shaft will turn 1/10 rotation. , which means the number of letters on the counter is 1 rotation.
2. This machine can be used for both manual and electricity.Remove the handle for electricity, and for electricity, set the maximum speed of the winding machine spindle to 2000r/min
3. Generally, add a little oil to the main oil hole.
How to use
1. The machine must be placed on a sturdy workbench, the table top is made of wood, and there are three holes on the bottom plate for fixing installation between the machine and workbench.
2. When in use, please pull the counter reset handle with your left hand to reset to 0000.To reset all count gear you need to pull the counter reset handle 2 times (otherwise the gear slip count will be inaccurate), you can operate it.Reset to 0 after operation is strictly prohibited to reset to 0 while driving.
