Feature

●【Blind Rivets】: Package Content: 100pcs Silver Tone Open End Blind Rivet, 4mm Rivet Diameter, 13mm Grip Length, 8mm x 1.7mm (D*T) Flange Size
●【Sturdy and Durable】: Made of 304 stainless steel (rivet body) and iron (mandrel) material, high strength and corrosion resistance, suitable for indoor and outdoor use
●[Features]: It is easier to connect than screws. Use manual rivet or air rivet tool to quickly and efficiently join two materials. Rivets are ideal if the parts are only accessible from one side
●【GOOD CHOICE】: Blind rivets are very suitable for applications where the rear of the joint (blind side). Often used in a series of materials to create high strength joints in machinery, furniture, trailer houses, marine, architecture, etc. In general, this process is used to join plastic or metal sheets
●【Installation】: To use the blind rivet, first drill a hole in the connected part. Insert blind rivets through the holes and secure them in place with a rivet tool (mechanical or pneumatic). Set the mandrel with a tool and clamp it and then pull it backwards while deforming the rivet body, expanding and clamping the jacket. Once deformation is complete, the mandrel will break at the designated breaking point


Description

Specifications:


Material: 304 stainless steel (rivet body), iron (mandrel).

Rivet Size: 0.2 x 0.5 inches (4 x 13 mm) (D*Grip L)

Mandrel Diameter: 2.45mm

Flange Size: 0.3 x 0.07 inches (8 x 1.7 mm) (D*T)

Package content: 100pcs x blind rivets



MATERIAL - Made of 304 stainless steel (rivet body) and iron (mandrel) material, high strength and corrosion resistance, suitable for indoor and outdoor use.


Features - Easier to connect than screws. Use manual rivet or air rivet tool to quickly and efficiently join two materials. Rivets are ideal if the parts are only accessible from one side.


Application - Blind Rivets are very suitable for applications where the rear of the joint (blind side). Often used in a series of materials to create high strength joints in machinery, furniture, trailer houses, marine, architecture, etc. In general, this process is used to join plastic or metal plates.


INSTALLATION INSTRUCTIONS - To use blind rivets, first drill a hole in the connected part. Insert blind rivets through the holes and secure them in place with a rivet tool (mechanical or pneumatic). Set the mandrel with a tool and clamp it and then pull it backwards while deforming the rivet body, expanding and clamping the jacket. Once deformation is complete, the mandrel will break at the designated breaking point.