Feature

●[Blind Rivet]: Package Content: 120 x Open End Blind Rivets (Silver Tone); 4mm Rivet Diameter; 20mm Grip Length; 8mm x 1.7mm (D*T) Flange Dimensions
●[Sturdy & Durable]: Made of aluminum material, lightweight, corrosion resistant, ductile, conductive, and thermal conductivity
●[Features]: It is easier to connect parts than screws. You can connect two materials quickly and effectively using a manual rivet machine or pneumatic rivet tool. If you only have one side to the part, then a jaclet fitting is the best choice
●[GREAT CHOICE]: Blind rivets are very useful for applications that do not get into the back of the fitting (blind side). It is commonly used in a series of materials that create high-strength connections in machinery, furniture, RVs, marine, architecture, etc. Typically, this process is used to connect plastic or metal plates
●[Installation]: To use the blind rivet, first drill a hole in the connected part. Blind rivets are inserted through the holes and are secured by a rivet tool (machine or air pressure). Deform the rivet body, inflate and clamp the connected components, while using a tool to set the mandrel and clamp it to the backward. Once deformation is complete, the mandrel will break at the designated breaking point


Description

Product Details:
Material: Aluminum
Rivet Size: 4mm x 20mm/0.16" x 0.79"(D*Grip L)
Mandrel Diameter: 2mm/0.08"
Flange Size: 8mm x 1.7mm/0.31" x 0.07"(Dia*T)
Package Content: 120pcs x Blind Rivets


Material - Made of aluminum material, lightweight, corrosion resistant, and has ductility, electrical and thermal conductivity.

Feature - Easy connection component than screws. Connect two pieces of material in a quick efficient manner with a hand riveter or pneumatic rivet tool. If the component only is accessible from one side, a riveted joint must be the best method of choice.

Applications - Blind rivets are great used in applications where there is no access to the rear(blind side) of the joint. Commonly used in machinery, furniture, RV, ship, construction and other scenes to make high-strength joining in a range of materials. Typically, the process is used for joining plastic or sheet metal.

Install Step - To use a blind rivet, a hole is first drilled through the parts to be joined. The blind rivet is inserted through the hole and is set with a riveting tool(mechanical or pneumatic); Setting and gripping the mandrel with the tool and pulling backward, while deform the rivet body to expand and grip the parts to be joined. The mandrel would break off at the pre-determined point The deformation is finish. ed.