Feature

●Software: Organic Light Emitting Diode Mini Stationary Wave Meter Software 1024 point interpolation algorithms correct the non-linearity of the diode and include the ability to display constant waves, peak forward power PF, peak reverse power PR, average forward power AF and average reverse power It simultaneously powers the Ar. The working frequency is 1.6-30MHz, the maximum measurement power is 100W
●Charging Indicator: The charging LED indicates that it will always turn on when charging and off after charging. When the input overvoltage, output lack voltage and overvoltage, output short circuit, charging time time-out, it will flash at 1.6hz frequency
●Charging Note: Please do not charge your wife after the battery port has been used. If the battery runs out and cannot start charging the stationary wavemeter, the red LED indicator on the charging port will be dim. Please do not unplug the charging plug. After a few minutes, plug and unplug the charging plug several times. When the charging light is reached to normal brightness, it will normally be charging state
●Hardware: Organic Emitting Diode Mini Stationary Wavemeter hardware features 2.23 inch 128x32 resolution orange color organic luminescent diode screen as a display screen, and an AVR mega32, MCU, 350 mA capacity built-in polymer lithium battery and 8.4V, 5V (Micro USB) charging. The stationary wave detector has three magnetic ring detection circuits and an M-type (sl16) connector
●Display: When the stationary wave meter is activated, the world map is first displayed, then the version number and percentage of the battery voltage, enter the main measurement interface. At this point, the constant wave and the corresponding power value will be displayed


Description

Specifications:
Item Type: Stationary Wavemeter
Product Material: Aluminum Alloy
Battery: 350 MAh Li-Polymer battery (built-in)
Display: 2.23" Organic Light Emitting Diode Screen
Resolution: 128x32
RF Connector: Sl16‑kf (m‑kf) Female Chassis
Frequency Range: 1.6‑30MHz
Power error: ±5%
>Max measurement power: 100W
Maximum display power: 138W
Constant wave display range: 1.0‑10
Insertion Loss: less than 0.1dB
Impedance: 50Ω
Charging port: 5V

How to use:
The left m base of the stationary wave meter is connected to the input terminal (radio station), the right m base is connected to the output terminal (connected to the antenna) Turn on the power switch on the right side of the stationary wave meter.

Package List:
1 x Stationary Wavemeter
1 x USB Cable