12V DDC-431 Timer Delay Relay Switch Digital LED Display Delay Controller for 12V DDC-431 Timer Delay Relay Switch Digital Data Storage Delay Controller 6V-30V Description:- Powerful Function, One-Button Emergency Stop Feature (STOP Button), Reverse Connection for Protection, Burnproof Reverse Connection with Power Off Memory - 5 Minutes Operation After Sleep Mode If not, the display will automatically turn off. Wake up any button - Different OP, CL, and LOP parameters are independent of each other, automatically store the setting parameters and have power down storage and other functions to meet almost any needs Product Manual: Operating Voltage: DC6V-DC30V (Wide voltage reverse connection for protection) Trigger Signal Source: 3.0V 24V High level trigger for signal ground and system ground for improved system interference ability. or short-circuit. Output Capacity: DC 30V/10A or AC 250V/10A devices can be controlled by the product size: 64mm*35mm*19.3mm Mounting Hole: Diameter 0.12 inches (3 mm) Working Temperature: -40℃~85℃ Operating Mode: P1 Mode: After the signal is triggered, the relay will turn on OP for a certain time. P1.2: The signal trigger is changed again timing P1.3: The signal triggers reset and the relay will be cut off and timekeeping P-2: Give the trigger signal, the relay will turn on the OP for a certain time. Once the time is completed, the relay will turn off after the time is completed. P3.1: Gives the trigger signal, the relay is turned on OP. Turn off the time CL Loops above operation, signals are regiven in the cycle and the relay is disconnected and timing stopped P3.2: No trigger signal is required in the back