Feature
●For extension of the hose between the connector and the nozzle, a 10m spool hose dedicated for garden coolers
●Uses: For outdoor irrigation in general household environments
●Hose size: Inner diameter 0.2 inch (4 mm) / Outer diameter 0
●Usable Water Pressure: Hydrostatic pressure 0.15 - 0.75 MPa (1.5 - 7.5 kgf/cm2), Recommended water pressure: 0.3 MPa or above
●Material: Polyvinyl chloride resin, polyester, heat resistant temperature: 140°F (60°C)
Description
Product Description
Extension of hose between connector and nozzle
32.8 ft (10 m) spool hose for garden coolers.
Algae Control
Blackout layer to prevent algae buildup, perfect for outdoor use
Pressure Resistant:
Pressure resistant to 0.75 MPa (0.75 MPa) that can be stopped by the end of the hose.
Amazon.com Review
●タカギのガーデンクーラー専用延長ホース
From the Manufacturer
|
|
|
|
|---|---|---|
|
Repair parts for Takagi "Garden Cooler". |
Can be used to extend the Taki "Garden Cooler". Can be extended up to 9.2 ft (9 m) (total length excluding connecting hose) |
Hose Installation 1. Remove the lock nut from the nozzle body and pass the hose off to the lock connection. 2. Insert the hose deeper than the line. 3. Tighten the lock nut without any gaps. |
