Feature

●2. VL53L0 uses ST Flightn technology to accurately measure the time the emitted infrared pulse reaches the closest object and reflects back to the detector. It can be considered a small self-contained LIDAR system
●3. Range measurement can be used through I12 of the sensor. C (TWI) interface, also used to configure sensor settings. The sensor has two additional pins: shutdown input and interrupt output
●4. VL53L0X is a good IC, but its small size and leverless A-package makes it difficult for general students and hobbyists to use. Also, because it works with the recommended voltage of 2.8 V, the interface of microcontroller can be difficult to operate at 3.3V or 5V. Our breakout board addresses these problems and keeps the overall size as small as possible while making it easier to start using the sensor
●1.ST Micro Electronics VL53L0X is a flight time adjustment system integrated into a compact module. Since this board is a VL53L0X carrier, it is recommended that you read the VL53L0X data sheet (1MB pdf) carefully before using this product
●5.Flight time adjustment system integrated into a compact module


Description

Lrocaoai PIN Description:
VDD stabilized 2.8V output About 150mA can be used to supply power to external parts. (If you bypass the internal regulator, you can use this pin as a 2.8V input with the VIN disconnected. )
VIN is a 2.6V-5.5V main power connection. The SSL and A-level shifters take the I2C line to this level.
Ground (0V) connection of GND power I2C control source also needs to share a common foundation with this board.
A-Level Shift I²C Data Line: High is VIN and Low is 0V.
SCL Level Shift I²C Clock Line: High is VIN, Low is 0V.
XSHUT pins are active low shutdown input. The board pulls it up to the VDD and activates the sensor by default. When this pin is driven low, the sensor becomes a hardware standby. This input will not be level shifted.
Color: Purple + Black
Material: Metal
Size: 25x12.2mm

Package Include:
2 x Set of adjustment sensor modules

Package contents above and other products are not included here.
Note: The color and size of the actual item may vary slightly from the color and size on the website due to lighting and display conditions. The margin of error for the measurement is 0.4 - 1.2 inches (1