What is Camber Bolt?
Shock absorbers with strut suspension and genuine bolts that fasten knuckles
A pre lead bolt that allows you to adjust the camber angle by replacing it.
Proper adjusting the camber angle is very important to the life and performance of the tire.
The surface is galvanized for superior corrosion resistance.
The camber corners are designed to be used when viewing the car from the front of the car,
It has a positive camber that tilts the top of the tire outward, and a negative camber that tilts inside.
Adjustable width from -1.75° to +1.75°
If you want to change the positive camber or negative camber, you can change the direction of each nail.
Change between suspension side or knuckle side
It is also easy to adjust by simply turning the bolt.
Product Specifications:
Surface Treatment: Zinc Plated
Size: 0.5 inch (12 mm) / 0.6 inch (14 mm) (2 sett
Adjustment width: approx. -1.75° to approx. +1.75°
Type: Double Head
Material: Steel
Screw strength grade: 10.9
Set Contents:
Bolt x 2
Nut x 2
Camwashers x 2 (*M14 has 4 pieces. )
Size:
M12
A Cam Diameter 0.5 inches (12 mm)
B Bolt Length: 2.4 inches (62 mm)
C Bolt HEX 15mm
D Nut HEX 15mm
M14
A Cam Diameter 0.6 inches (14 mm)
B Bolt Length 2.8 inches (71 mm)
C Bolt HEX 17mm
D Nut HEX 17mm
Note:
This is a reference model only, so please check the details yourself.
For vehicles that already have genuine adjustment bolts on the upper side, please replace the bolts on the bottom.
There may be scratches or stains on the product.
It is highly recommended that you adjust the alignment after installation.
This product is a strut type suspension product. Not for use with other suspensions.
The product is not guaranteed to prevent wear by attaching camber bolts and conform to safety standards.
Installation is at your own risk. Direct or indirect damages and costs are not covered under guarantee.
Warranty period: 1 month from the date of arrival