Thank you for looking.
This listing is for a stainless steel top bridge cover that attaches to the top bridge of the Zephyr 400 and G1.
The second or third photo is the image after installation, and the product is the product in the first picture.
Compatible vehicles are 39φ fork vehicles from 1989 (C1) to 1995 (C7) and 1996 (G1).
Please note that the front fork from 1997 (G2) to 2008 G8FA 41φ will not be eligible for vehicles.
(41φ forks are sold on our Amazon site).
■Product Features■
Genuine Zephyr 400 (G1) Top Bridge is made of die cast aluminum and most vehicles that have rust or darkened over time.
Removing the top bridge and buffing and reinstalling it will take much effort and time.
This product is very easy to install, just remove the handle and stem bolts and place it over your factory top bridge.
The finish is 700# stainless steel with a mirror finish, giving it a more beautiful and luxurious finish than an aluminum buffing finish.
In addition, installation instructions are included so you can install them with confidence.
■Important information ■
Double-sided tape is not included on the back of the product, so please install it with a bidders using double-sided tape or similar tape.
Shape may vary slightly due to individual differences in top bridge and tightening torque on front fork.
The material is very thin 0.03 inch (0.8 mm) of stainless steel, so if you attempt to remove it after applying it with double-sided tape, etc., it may bend easily.
(Be sure to check the position of the paste carefully before installing)
Installation and use at your own risk.
We will not accept any claims, damages or loss of installation or vehicle charges.
If you are unsure about installation, please ask a dealer or specialty store.
·Product **will only deal with initial defects within 7 days of arrival.