Feature●Universal Product: 1.4 inches (35 mm) / 1.4 inches (35 mm) / Front Fork Vehicle Size: Handlebar: 0.9 inches (22.2 mm) / Handlebar Inner Diameter: 0.6 inches (16 mm) / Clamp Portion Height: 1.4 inches (35 mm) / Effective Handle Length: 9.4 inches (240●As this is a general-purpose product, it may not be able to install even if the model uses a 1.4 inch (35 mm) front fork. Please check the size before purchasing to make sure it does not interfere with the tank or cowl. Drilling may be required to install the switch box depending on the vehicle. In addition, replacement of brake hoses and axle wires may be required. 100% Brand New Instruction manual not included●Reference models: Honda: VTZ250, MC15, VT250F/FC/FE, MC08, VT250Z, CBX400F, VT250F/F2H/FG, MC15, JADE, MC23, CBR 400F, Endurance, NC17, VT250F Integra, F2F, MC0F. 8, GB40 0TT, NC20, CB400SS, NC41, CB250Four, MC14, CBR250R, MC17, CL400, CB1, CB750F, FZ/FA/FB, VF400F/Integra, NC13, GB500TT, PC16, CBX550F, PC04, [YAMAHA] XS250 17E, Dragster 250, FZ250, RZ250R/RR, RZ350R/RR, XS400, 16Y●[SUZUKI] Wolf 125/200, GS250FW, GF250/S, RG250Gam, GSX400/FWS/82, GSX750E, [KAWASAKI] XJ400/E/D, SR400, SR50R, GPZ250/S, Z400. 0GP, GPZ 400/FDescription
The sauce angle is generally about 6 degrees and the position is not too tight.
The handle is at the same height as the fork clamp position, so it is relatively lacy position.
Because it is machined from aluminum, it has a very good texture, and you will love the sharp design.
The handle is hollow so you can attach the bar end of your choice.
Main models with 1.4 inch (35 mm) front fork
Honda:
CBR250F,CBR250R(MC17),VT250FC/Integra/FE(MC08/MC15),VT250ZE/FG/F2H(MC08/MC15),VTZ250,Zelbis,Jade,CB400SS,CB-1,CL400,CBR400F/Endurance /F3,VF. 400F/Integra,GB400TT,GB500TT,CBX 400 F-F2 81,CBX550F,CB750FZ/FA/FB,
YAMAHA
XS250, Drugster 250, FZ250, RZ250R(29L), RZ250RRR, RZ350RR, Z350RRR, XS400, SR400/SR500, XJ400/E/D(4GO),
SUZUKI
GS250FW,GF250/S,Wolf 125/200,RG250🍀,GSX 400 FWS 82,GT750,GSX750E,
KAWASAKI
GPZ250R,KR250/S,Z400GP,GPZ400/F,