This HUD is designed to reflect your vehicles computer information on your windshield and provide a safer everyday driving experience. This is because the driver eliminates the need to get your head wet to watch the instrument cluster. If you install this unit correctly, you can monitor your speed more effectively. This helps beginners and experienced drivers to avoid infringement.
Use and Install Reflective Film:
Using this unit without the use of a reflective film, the windshield may observe the double image. If you see the double layer, it is due to the dual layer structure of the windshield and you will need to install the film as follows:
1. Place the included non-slip mat on the dashboard to the desired position.
2. Observe the position of the HUD reflected and place the reflector in place. A. Make sure the surface is clean and dry before installing the film.
Remove the back side of the marked B. (1) and install the film on the clean windshield.
C. If you are satisfied with the place, use a credit card to remove any remaining air bubbles or air pockets.
D. If you need to adjust the HUD reflection, please remove the front with (2) markings and use the non-slip mat to relocate.
Technical Parameters:
Ambient Temperature: -40°C to +176°F (-40°C to 80°C) Atmospheric Pressure: 86 - 106 KPa
Relative Humidity: 10% - 95% ambient noise 60dB(A)
Alarm sound level: 30dB(A)
Operating voltage: 9V - 16Vdc (12Vdc / 400mA)
HUD Size: 3.5 x 2.1 x 0.5 inches (9 x 5.4 x 1.2 cm).
HUD Weight: 1.4 oz (40 g).