Feature(may vary by option.)
●Easy DIY installation of aftermarket sliding doors. ] We recommend door thickness 35-45mm The load capacity of the rail is 100kg. This product is a kit of related components, and the door itself is not included with the kit. Ensure that the distance of at least 5.9 inches (150 mm) from the rail surface to the ceiling surface. Please ensure the rail length is more than twice the width of the door, and the bottom of the door should be 0.4 inches (10 mm) or more
●(Smooth Slide and Quiet Sound) (Hanging Door) Uses high strength and durable POM resin and ball bearings for quiet and smooth operation. [Metal Color] The color of the rail is made of carbon steel, which disperses surface pressure on a wide range of surfaces and firmly fix the rail to the wall. Rail: Made of 0.2 inch (6 mm) thick x 1.6 inch (40 mm) wide carbon steel to ensure smooth operation and safety, and powder coated for extra durability. Door Stopper: The stopper prevents it from falling off from the rail is easily adjusted using a hex screw. Stops off: For maintenance, the screws can be loosened and rotated easily to remove the door. [Floor Guide] It supports 2 patterns that are used for a grooved door on the bottom and the door is held by both sides
●Load capacity testing performed by a third party institution: Product test has been cleared (load load load test for rail construction condition), load bearing tests reproduced in Japan by a third party agency (Tokyo). The rail deformation begins with a test load of about 300 kgf; and the installation part has been progressed without pulling or breaking, so the test is finished (at approx. 650 kgf) *Fixed to the square material (Cedar) For hanging doors, the sliding door frame will begin to be deformed over approximately 500 kgf; and the fixed screw is pulled out at approximately 750 kgf. Jita There was no damage to the hanging door cars or frames. Fixed to 1.5 x 3.5 inches (38 x 89 mm) 2 x 4 materials (cypress cypress). Both have checked a safety rate of over 6 times, so you can use it with confidence
●(Set Contents/Product Specifications) [Materials] Rail body: Carbon steel (durable powder coated finish) Rail mounting color: carbon steel Suspension door frame: carbon steel (durable powder coated finish) Suspension door roller: POM resin (built-in metal ball bearings) Floor guide, detach: POM resin, Stopper: Aluminum, Screw bolts, Screws: Steel, Concrete anchor plug: PP
●Worry-Free Point 1: All products are backed by a 3 year long warranty with thorough and strict quality control
●Worry-Free Point 2 [Reliable PL Insurance Applicable Company] In the unlikely event of damage due to the product, we will provide compensation for damages up to 100 million yen
●Worry-free Point 3: Japanese Company & High Quality Customer Support: We are a manufacturing company in Tokyo. In order to deliver high-quality products and services, Japanese staff will respond to you carefully and carefully. We are also an eligible invoicer (Invoice Policy). If you have any questions, please feel free to contact us
[6FT (approx. 7.1 inches (1 | 831 mm)]
[6.6FT(approx. 2 | 001mm)]
Description
Easy DIY installation of aftermarket sliding doors. ]
We recommend door thickness 1.4 - 1.8 inches (35 - 45 mm). The load capacity of the rail is 220.5 lbs (100 kg).
This product is a kit of related components, and the door itself is not included with the kit. Ensure that the distance of at least 5.9 inches (150 mm) from the rail surface to the ceiling surface.
Please ensure the rail length is more than twice the width of the door, and the bottom of the door should be 0.4 inches (10 mm) or more.
Smooth Slide for Quiet Sound:
(Hanging Doors) Uses high strength and durable POM resin and ball bearings for quiet and smooth operation.
[Metal Color] The color of the rail is made of carbon steel, which disperses the surface thickness on a wide range of surfaces and firmly fix the rail to the wall.
Rail: Made of 0.2 inch (6 mm) thick x 1.6 inch (40 mm) wide carbon steel to ensure smooth operation and a powder coating for extra durability.
Door Stopper: The stopper prevents it from falling off from the rail is easily adjusted using a hex screw.
Stops off: For maintenance, the screws can be loosened and rotated easily to remove the door.
[Floor Guide] It supports 2 patterns: a method that is used for a grooved door or a side of the door.
Load bearing tests on single sliding door
Load bearing tests are conducted for single sliding door. Load capacity test, single sliding door, load capacity approx. 165.3 lbs (750 kgf); *Test finished with wood screw pullout without destroying the door itself.
Load bearing test for rail construction
Load bearing test with rail construction status: (plastic) deformation from approximately 650 kgf (300 kgf) *After test, without destroying
(Set Contents/Product Specifications)
[Material]
Rail body: Carbon steel (durable powder coated finish).
Rail mounting color: carbon steel
Hanging door frame: Carbon steel (durable powder coated finish).
Sliding door roller: POM resin (built-in metal ball bearing)
Floor Guide / Stopper: POM resin.
Stopper: Aluminum
Screw Bolts and Screws: Steel
Anchor plug for concrete: PP
|
|
|
|
|
|
|---|---|---|---|---|---|
| Gomine | Non-woven Planter | Protective Glasses | Eyeglass Screws | Double-sided tape | |
| Customer Reviews |
286
|
102
|
632
|
257
|
1,487
|
| Price | ¥3,980 | ¥1,520 | ¥1,298 | ¥1,000 | ¥670 |
| Description | At about 1.2 inches (3 cm) thick, it can be folded into a compact size, so you can set it up just on a day of garbageWhen not in use, it can be stored in a space saving way. | Non-woven fabric material is very lightweight and easy to carry.The handle makes it easy to move even with soil inside.Folds up for compact storage when not in use. | 99% transparency and clear visibility; Waterproof, water resistant and does not interfere with your work. The anti-fog coating allows you to hear your perspective regardless of the distance. | In addition to a convenient precision screwdriver, tweezers, and cleaning cloth set, this set is the perfect tool for fixing eyeglasses. | Even though it is a strong double-sided tape, it can be removed repeatedly and will not leave a mark on the adhesive surface. You can cut it to the length you want with scissors, and you can effectively use the wall surface that you dont want to leave a mark. |