Feature(may vary by option.)
●Industrial IoT Module based on CM4: Suitable for IoT applications such as IoT Getaway, wireless router, intelligent data acquisition etc. Support 4G / 5G / LoRa, Multi-interface●Standard CM4 socket and partial RaspberryPiGPIO header Suitable for Compute Module 4 Lite / eMMC series modules●The onboard M.2 slot also comes with a Mini-PCIe adapter, which is compatible with 4G/5G/LoRa wireless module with M.2 or Mini-PCIe interface●Abundant interface: Provide interface including CSI / HDMI / USB / ETH / CAN / RS485 / M.2BKEY●Application: Suitable for IoT gateway, 4G/5G router, IoT data acquisition and monitoring, industrial PLC or other industrial applications[CM4-IO-WIRELESS-BASE-Acce-A]
[CM4-IO-WIRELESS-BASE]
Description
Overview
- This is an industrial expansion module based on the Raspberry Pi CM4, which has a common interface such as Gigabit Ethernet, HDMI, USB, GPIO, and can connect additional 4G/5G/LoRa wireless communication module via M.2 or Mini-PCIe. Socket There are also industrial interfaces/resources such as RS485, CAN, RTC.
- When combined with an industrial rail mount protective case, this module is an ideal choice for building IoT gateway, 4G/5G router, IoT data acquisition, and even PLC devices for industrial automatic control systems.
Specifications
CM4 Socket: Suitable for all variations of Compute Module4
Networking:
- Gigabit Ethernet RJ45
- M.2 B KEY / Mini-PCIe (via adapter), to connect 5G / 4G / LoRa wireless module
- Nano-SIM card slot, support standard Nano-SIM card for 5G / 4G / 3G / 2G communication
USB: USB 2.0 x 3.
Pin header: Non-insulated RS485 x 2, non-insulated CAN x 1, partial GPIO pin
Camera: MIPI CSI-2 x 1 (15-pin 1.0mm FPC connector)
Video: HDMI x 1, support 4K30fps output
RTC: Real-time clock with battery socket and function to wake up compute module 4
Storage: MicroSD card socket for Compute Module 4 Lite (without eMMC) variant
Fan header: 5V/12V, speed adjustable and measured
Power Input: 5V or 7-36V
Dimensions: 5.7 x 3.5 x 1.6 inches (145 x 90
Notice
- Do not hot plug any device other than USB and HDMI.
- Please check the FAN voltage before connecting the cooling fan. BASE board supports 12V cooling fan by default. If you want to use 5V cooling fan, please change the FAN_VCC resistance.
- For stable operation, please do not connect other devices while writing CM4 through Type-C interface.
- We recommend a power supply of 5V /2.5A or higher for proper operation.
- Do not power the baseboard at the same time with 12VDC and 5VTypeC
- USB 2.0 is disabled by default. You need to add a line of dtoverlay = dwc2, dr_mode = host to the config.txt to activate.
Package Contents
- 1 x CM4-IO-Wireless Base
- 1 x PCIe to 4G / LoRa Adapter
- 1 x Screwdriver
- 1 x Screw pack
- SIM7600G-H-PCIE
- PCB Antenna IPEX Connector
- 12V 2A Power Adapter
Development Resources
For additional technical support, please contact us or visit Waveshare official website