TEAM TSURIO RAINBOW8 is a community of users of the product name "Tsuru-Man Rainbow" which is a rainbow color fishing net.It also started as a brand of original products for the community.TEAM TSURIO RAINBOW8 is an abbreviation to be described as TTR.TTRs are "fun to use" and "creation of things to employ and empathy by community members.
TR is a brand and community.Dear you, do you have fun with TTR?
A soft half titanium tip designed to target Chinese Japanese Japanese Japanese breasts.The soft tip makes it more enjoyable in real fishing scenes as you can understand the following things as follows:
Wave/tide: Depending on the stream and tide, the tip may move periodically like a metronome
Wind: The tips may sway with the wind.
→ Some regularity in the tip motion caused by waves and wind.
Fish Belief: Regardless of the timing and cyclic wavy winds suddenly irregular changes appear to the tips.
For example: The tip of the head can suddenly enter, and the tip will be wiped off in an instant.
After purchase, the product requires the buyer to cut the original part (if necessary) and adjust the head diameter of the head head.The tip fits for Sakura Loofah Rod Ninja Master heads after cutting the original diameter adjustment.Compatible Model: Ninja Master 255 (1.6 inch (4 cm) cut). Soft and hard to break, and has excellent vibration transmission.This is an excellent tip with a slight eye sensitivity that appears in the behavior of the heads, and the hand sensitivity is easy to transmit vibrations to your hand.The color of the tip of the tip is orange and white, which increases the eye sensitivity.In particular, it is suitable for use during the seasons where black bream/chinu-hatari tends to become smaller, from late autumn to early spring.Product composition: 1 x bristle, sandpaper for adjusting the original diameter (#240 - #1000), work manual when adjusting
|
|
|
---|---|---|
Basic SpecificationsTotal length: 21.7 inches (55 Titanium Alloy Part: 8.7 inches (22 cm), Glass Solid Part: 13.0 inches (33 cm) Joint Tip After purchase, the product requires the buyer to cut the base of the head (if necessary) and adjust the original diameter. Base diameter: 0.16 inches (4.0 mm) / Tip diameter: 0.01 inches (0.3 Material: Titanium alloy/glass fiber. |
GuideNumber of Guides: 12 (10 pieces: Stainless steel; 2 pieces: Hard guide) The tips of the tip (10 pieces) are made of stainless steel, so the yarn is for nylon and fluorocarbon use. |
Static Load TestingCondition: Rod elevation angle: 30° Thread nylon No. 2 through all guides. Gunball: Attach B5 x 2 to the string. Bends under this condition ■Note■ This item is 0.01 inch (0.3 mm) tip diameter. |
|
|
|
---|---|---|
1. Cut out a part of the head root.Attach masking tape to position the original product fixed to the rod #2.Attach the masking tape to the tip as shown in the picture 1.For Ninja Master 255 Arrow Length: 1.6 inches (4 cm) (Buyers own responsibility for other rods. ) (It is more preferable if you measure the original diameter of the genuine product with a verdigis.) |
2. Pre-cutWhen cutting, shave the tip little by little and rotate it slightly and repeatedly.(Be careful not to scrape the side of the masking tape too much.) |
3. Determine the position of the head diameter adjustmentAttach masking tape to the position of the original product (left side of the image) fixed to the rod (#2).Attach the masking tape to the tip (right side of the image) to the exact length of the original heads. |
|
|
|
---|---|---|
4-1. Adjust the diameter with sandpaperRotate the tip frequently and add a small amount of water to the tip or sandpaper and use sandpaper to align the rod (#2) and frequently, and then shave carefully to avoid oversharpening. Start with a coarse count (#240 to #400) and scrape (image A) when the tip fits the rod, then smooth the surface (#800 to #1000) with a fine count (image B) |
4-2The initial roughness is recommended as the reference of image A, and the finish is done at the time of image B. If the white part of the glass fiber is exposed when the tip is connected to #2, apply the black nail color. |
5. Finished(Reference) The image is a finished image. |
After fishing (use) wash this product with tap water and remove salt before drying it in the shade. Store away from direct sunlight. This may cause UV rays to deteriorate the paint coating.