Feature(may vary by option.)
●Dress up your rearview of your favorite car? This luxurious 2-piece scarf cutter comes in two colors: a simple mirrored silver and a metallic brilliance titanium color. High quality stainless steel gives the rear end a high-grade look. It also smooths out the exhaust and increases power to give you a wonderful driving experience! Would you like to add a little bit of style to your precious car and make it stand out from others?
●2 square pieces and stylish design with exquisite finish gives you an impressive rear view. In addition, since the 2 pieces are difficult to see the genuine scarf after installation, you can dress it up with less "afterward" feeling. Available in a beautiful mirrored silver color and titanium color with artistic burning. Both parts of the rear end give off a sense of luxury. The "large aperture" produces a muffler end that does not feel post-out
●It is made of rust-resistant stainless steel, so it is resistant to rust and corrosion, and has excellent durability and corrosion resistance. Drainage holes for good drainage. Protect this dual muffler cutter from rust Easy to install by inserting into existing muffler and tightening bolts, without drilling or welding. In addition, the mounting bolts are 3 point and can be firmly held for peace of mind. Please make sure you install the bolts tightly. (To prevent falling off) If there is no interference with the bumper, it is also recommended that you attach it very easily
●Installation Precautions for Vehicle Inspection: "Declaration of the fineness of the security standards for road transportation vehicles, Section 2, Clause 85, Determining the measurements of the vehicle is above 3.5 inches (9 cm) Therefore, when installing a muffler cutter, it will not pass vehicle inspections if you have to ensure a minimum height of 3.5 inches (9 cm). In addition, there is regulations on exhaust pipe (muffler) protrusion and the muffler should not extend beyond 10mm from the lead face including the floor line above it. However, if the scarf has a rounded curvature radius above 2.5mm, it can protrude beyond 10mm lead face, including floor lines. Understand the safety standards listed above and install your muffler cutter safely to pass vehicle inspection
●[Precautions] Compatible installation size: Wearable muffler mounting part size: 1.2 - 2.4 inches (30 - 60 mm); Displacement limit → Compatible with passenger cars of 5.9 - 6.8 gal (1.5 - 2.0 L) It is not compatible with vehicles with more displacement. This is a universal type that can be installed if there is a problem with the mounting diameter, bumper interference, etc. Please check the size details of the installation part before purchasing. Please note that installation cannot be performed if the size does not fit. Other sizes may differ from the images that are expected to not be confirmed beforehand, so please check carefully before purchasing. If you tighten it tightly, the risk of falling off will be reduced, but if you are worried about it, please prepare a separate wire to prevent it from falling off. It is also not compatible with the Prius series. Please be aware of this. Package Contents: 1 x Dual Muffler Cutter. Size: Approx. 7.5 x 6.2 inches (190 x 158 mm). Inlet Inner Diameter: 2.5 inches (63 mm). Weight: 16.5 oz (473 g). Material: Made of high strength stainless steel that provides maximum durability
[Silver.]
[titanium blue]
Description
Dress up your rearview of your favorite car? It also smooths out the exhaust and increases power to give you a wonderful driving experience! Would you like to add a little bit of style to your precious car and make it stand out from others? In addition, since the 2 pieces are difficult to see the genuine scarf after installation, you can dress it up with less "afterward" feeling. Available in a beautiful mirrored silver color and titanium color with artistic burned tone. Both parts of the rear end give off a sense of luxury.The "large aperture" produces a muffler end that does not feel post-out.
|
|
|
|
|---|---|---|
|
2 square pieces and stylish design with exquisite finish gives you an impressive rear view. |
This luxurious 2-piece scarf cutter comes in two colors: a simple mirrored silver and a metallic brilliance titanium color. High quality stainless steel gives the rear end a high-grade look. |
Easy to install by inserting into existing muffler and tightening bolts, without drilling or welding. In addition, the mounting bolt is 3 point type, so you can hold it firmly without any problem. If there is no interference to the bumper, it is very easy to install. Installation Precautions for Vehicle Inspection: "Declaration of the fineness of the security standards for road transportation vehicles, Section 2, Clause 85, Determining the measurements of the vehicle is above 3.5 inches (9 cm)Therefore, when installing a muffler cutter, it will not pass vehicle inspections if you have to ensure a minimum height of 3.5 inches (9 cm) or more. In addition, there is regulations on exhaust pipe (muffler) protrusion and the muffler should not extend beyond 10mm from the lead face including the floor line above it. However, if the scarf has a rounded curvature radius above 2.5mm, it can protrude beyond 10mm of lead face, including floor lines.Understand the safety standards listed above and install the muffler cutter to pass vehicle inspection. |
|
|
|
|
|---|---|---|
|
Package Contents: 1 x Dual Muffler Cutter. Size: Approx. 7.5 x 6.2 inches (190 x 158 mm). Inlet Inner Diameter: 2.5 inches (63 mm). Weight: 16.5 oz (473 g). Material: Made of high strength stainless steel that provides maximum durability. |
[Precautions] Compatible installation size: Wearable muffler mounting part size: 1.2 - 2.4 inches (30 - 60 mm); Displacement limit → Compatible with passenger cars of 5.9 - 6.8 gal (1.5 - 2.0 L).It is not compatible with vehicles that have more displacement.This is a universal type that can be installed if there is a problem with the mounting diameter, bumper interference, etc.Please check the size details of the installation part before purchasing.Please note that installation cannot be performed if the size does not fit.Other sizes may differ from the images that are expected to not be confirmed beforehand, so please check carefully before purchasing.If you tighten it tightly, the risk of falling off will be reduced, but if you are worried about it, please prepare a separate wire to prevent it from falling off.It is also not compatible with the Prius series.Please be aware of this. |
|
Color variations
|
|
|
|
|---|---|---|
Titanium Color |
Silver |
|
