Decorate your car! SparcoCorsa Car Emblem
Installation Method:
1: Clean the surface of the paste and wipe off the oil such as wax and coating agents.
2: Temporarily apply and position it. Please check the glue surface for any floating.
3: Align with the line under the emblem, create a line with masking tape, etc. and stick to the line.
4: Peel off the tape backing of the product and stick it on the edge to avoid air bubbles in the position
5:If there is no problem with the paste position, please press it with appropriate force.
6: Peel off the masking tape.
[Note]
To prevent the product from peeling, be sure to remove oil before sticking.
When the temperature is low, the adhesive strength of the tape will not be sufficient, so please heat the tape surface with a blow dryer or the like, before sticking.
Please avoid washing your car within 24 hours after pasting.